| Ø215.9 mm四牙轮取心钻头设计与应用 |
| 投稿时间：2021-09-30 修订日期：2022-01-02 点此下载全文 |
| 引用本文：赵明,邵玉涛,宋刚,等.Ø215.9 mm四牙轮取心钻头设计与应用[J].钻探工程,2022,49(1):41-48.ZHAO Ming,SHAO Yutao,SONG Gang,et al. Design and application of Ø215.9mm four-cone coring bit[J]. Drilling Engineering, 2022,49(1):41-48. |
| 摘要点击次数: 877 |
| 全文下载次数: 636 |
|
| 基金项目:中国地质调查局地质调查项目“深海钻探技术与工程支撑（中国地质科学院勘探技术研究所）”（编号DD20190585） |
|
| 中文摘要:针对硬岩及复杂地层取心钻进效率低、钻头寿命短的问题，依托“深海钻探技术与工程支撑”项目研制了?215.9 mm四牙轮取心钻头。通过合理布置牙轮角度与分布、优化取心结构，有效提高岩心采取率，保证钻头在硬岩中的钻进速度与可靠性。在之前进行了陆地试验和海洋试验并不断优化改进的基础上，本次在内蒙古自治区呼和浩特市清水河县首次进行了实验性的地热勘探取心施工，全段地层均为高研磨性、高硬度花岗岩，取心困难。采用?215.9 mm牙轮取心钻头配合常规的取心钻具，钻进效率达1.2 m/h，岩心采取率为70%~90%，取得了较好的应用效果，为海洋钻探硬岩取心提供了技术保障。 |
| 中文关键词:四牙轮取心钻头 复杂地层 钻进效率 钻头寿命 地热勘探井 海洋钻探 硬岩取心 |
| |
| Design and application of Ø215.9mm four-cone coring bit |
|
|
| Abstract:The ?215.9mm four-cone coring bit is a cone coring bit designed and produced under the project of "Deep Sea Drilling Technology And Engineering Support"， and is mainly used for high-efficiency and long-run coring in hard rock and complex strata. By reasonably arranging the cone angle and distribution， and optimizing the coring structure， core recovery can be effectively improved to ensure the drilling rate and reliability of the bit in hard rock. Land test and marine test had been conducted for continuous optimization and improvement of the bit； and experimental geothermal exploration coring was carried out for the first time in Qingshuihe county， Hohhot city， Inner Mongolia autonomous Region. The whole coring section is granite of high abrasiveness and high hardness， and difficult to core. With the combination of the ?215.9mm cone coring bit with conventional coring tools， drilling speed reached 1.2m/h with core recovery of 70%~90%. It has good application value and can provide technical support for marine drilling hard rock coring. |
| keywords:four-cone coring bit complex strata drilling efficiency bit life geothermal exploration well marine drilling hard rock coring |
| 查看全文 查看/发表评论 下载PDF阅读器 |
