金刚石钻进岩石破碎过程与规程参数关系的研究
投稿时间:2020-11-02  修订日期:2020-11-02  点此下载全文
引用本文:
摘要点击次数: 98
全文下载次数: 0
作者单位邮编
汤凤林 中国地质大学(武汉)工程学院湖北 武汉 430074 430074
НескоромныхВ. В. Сибирский федеральный университет Красноярск 660041 Россия 660041
宁伏龙 中国地质大学(武汉)工程学院湖北 武汉 430074 430074
段隆臣 中国地质大学(武汉)工程学院湖北 武汉 430074 430074
ЧихоткинВ. Ф. 中国地质大学(武汉)工程学院湖北 武汉 430074 430074
基金项目:国家自然科学基金面上项目“液压冲击回转作用下热压WC-CU基孕镶金刚石钻头的磨损行为研究”(编号:41972327)
中文摘要:金刚石钻进是我国的一种主要钻进方法,在地质勘探和油气井钻进中得到了广泛应用。为了提高其技术经济指标,研究金刚石钻进时岩石的应力变形状态、岩石破碎过程及其与规程参数的关系很有必要。俄罗斯钻探工作者在金刚石钻进岩石破碎方面做了大量的试验研究工作,研究了钻进速度与规程参数的优化关系,提出了临界规程参数组合的概念,推荐了保证正常钻进、防止钻头非正常磨损等的措施。值得我国同行们参考。
中文关键词:金刚石钻进  岩石应力应变  岩石破碎过程  岩石预破碎区  钻进规程参数  临界规程参数组合
 
Analytical research on the rock fragmentation process and its relationship with drilling parameters in diamond drilling
Abstract:Diamond drilling is one of the main drilling methods in China. It is applied widely in geological explotation, and oil and gas drilling. In order to improve technical and economical index of the method, research on the stress-strain state of rock to be drilled, the rock fragmentation process and its relationship with drilling parameters is very necessary. Russian drillers have done a lot of relevantwork: they studied the optimal relationship between penetration rate and drilling parameters, proposed the concept about the combination of critical drilling parameters, and recommented measures guaranteeing normal drilling and prevening abnormal wear of drill bits, etc., which can provide some reference for the Chinese counterparts.
keywords:diamond drilling  stress-strain state of rock to be drilled  rock fragmentation process  rock pre-crushing area  drilling parameters  combination of critical drilling procedure parameters
  查看/发表评论  下载PDF阅读器