金刚石钻进技术指标综合研究及其计算机程序控制
投稿时间:2022-10-10  修订日期:2022-10-10  点此下载全文
引用本文:
摘要点击次数: 171
全文下载次数: 0
作者单位邮编
汤凤林 中国地质大学(武汉) 430074
基金项目:国家自然科学基金面上项目:液压冲击回转作用下热压WC-CU基孕镶金刚石钻头的磨损行为研究 (编号:D0219,2019-2022)。
中文摘要::钻探工程施工是一项重体力劳动。目前,多数基本上凭经验进行打钻。应该改变这种情况,把凭经验打钻转变到依靠科学打钻上来。俄罗斯钻探专家提出把金刚石钻进中的机械钻速、钻头每转进尺和单位进尺能耗量三个参数综合起来研究,开发出了控制钻进过程最优化的软件,经使用,取得了良好的效果,值得我们借鉴。
中文关键词:凭经验打钻  靠科学打钻  机械钻速  钻头每转进尺  单位进尺能耗量  最优化软件
 
Comprehensive research on technical indexes in diamond drilling and their computer program management
Abstract:Drilling engineering is a heavy physical work. At present majority does it basically by experience. That situation should be changed, the drilling by experience is changed up to by science. Russian drilling specialists have proposed comprehensive research on the three indexes, i.e. drilling rate, bit penetration rpm and energy consumption per meter in diamond drilling and developed a software controlling optimization of drilling process. Good results have been obtained by using the software and it is worth for us to learn from.
keywords:drilling by experience  drilling by science  drilling rate  bit penetration rpm  energy consumption per meter  optimization software.
  查看/发表评论  下载PDF阅读器