| 结晶岩取心深孔钻进施工设想技术方案 |
| 点此下载全文 |
| 引用本文：张伟.结晶岩取心深孔钻进施工设想技术方案[J].钻探工程,1996,(4):5-7.. The Technical Concept for Drilling a Deep Scientific Cored Hole in Crystalline Bed Rock[J]. Drilling Engineering, 1996,(4):5-7. |
| 摘要点击次数: 1311 |
| 全文下载次数: 300 |
| 张伟 |
| 中国地质勘查技术院 |
|
| 中文摘要:介绍了制定中国结晶岩取心科学深孔钻进施工技术方案的总原则和先决条件。以此为基础，提出了建议的钻孔结构套管程序。最后提出了能满足这些原则、条件以及钻孔结构和套管程序要求的５０００ｍ取心科学钻孔施工设想技术方案。 |
| 中文关键词:取心深孔，科学钻探，技术方案 |
| |
| The Technical Concept for Drilling a Deep Scientific Cored Hole in Crystalline Bed Rock |
| Zhang Wei |
| Chinese Academy of Geoexploration Beijing 100083 |
|
| Abstract:Special drilling techniques are needed for drilling of a 5, 000m deep scientific cored hole.The general criterion for the technical design is to optimize the economics of drilling operationunder the prerequisite of meeting the requirements of geoscientific research and of being technically feasibility.The final diameter of the borehole should not be less than 6 inches (152mm), to meet therequirement of logging which is an indispensible means for obtaining geoscientific information.According to the technical level and current status of the drilling techniques in the world, a hybridized drilling technology (rotary drilling/mining drilling) should be adopted for the drillingunder such special conditions. This technology is characterized by installing a high speed topdrive head onto a petroleum rotary rig, which makes diamond wireline coring possible and hasbeen proved in praxis to be the most cost effective method for coring in deep and hard formation.Based on this concept, a technical plan proposed for the drilling of a 5, 000m deep coredhole in hard formation is drawn up, with the main points as follows:(1) drill rig: petroleum rotary rig combined with a hydraulic or electric top drive system;(2) drill rod: Sa inch (140mm) steel rod for wireline coring;(3) core bit: impregnated diamond core bit and/or "Kantanite" core bit ;(4) coring system: combined coring system with hydraulic hammer, retractable bit anddown - hole motor (PDM) incorporated with the wireline coring system;(5)drilling mud: solid free or low solid drilling mud systems with thermostability as highas 150C and having low flow and friction resistance, high cuttings - carrying capacity and having no negative effects on geochemical analysis. |
| keywords:deep coring hole scientific drilling technical scheme |
| 查看全文 查看/发表评论 下载PDF阅读器 |
|
|
|
