圆梁山隧道高压富水区径向注浆技术研究及应用 |
投稿时间:2003-06-24 修订日期:2003-06-24 点此下载全文 |
引用本文:王雪琴,张民庆.圆梁山隧道高压富水区径向注浆技术研究及应用[J].钻探工程,2004,31(1):57-62.WANG Xue-qin,ZHANG Min-qing. Research and Application of Radial Slip Casting Technology in High Pressure Water Bearing Zone Within Yuanliangshan Tunnel[J]. Drilling Engineering, 2004,31(1):57-62. |
摘要点击次数: 1161 |
全文下载次数: 335 |
|
基金项目:铁道部重点科研项目“渝怀线圆梁山隧道关键技术试验研究-B(高水压、富水区隧道帷幕注浆综合技术研究)”(2001G009-3〈B〉) |
|
中文摘要:以圆梁山隧道高压富水区为对象,研究了径向注浆的边界条件、注浆材料和注浆施工,并进行了现场应用,取得了较好的效果。随着以后大量地下工程的设计与修建,径向注浆技术会越来越被广泛推广应用。 |
中文关键词:圆梁山隧道 径向注浆 边界条件 注浆材料 注浆施工 |
|
Research and Application of Radial Slip Casting Technology in High Pressure Water Bearing Zone Within Yuanliangshan Tunnel |
|
|
Abstract:Boundary conditions of radial slip casting, grouting materials and grouting techniques are researched taking the high pressure water bearing zone within Yuanliangshan tunnel as a studying target. The research results were applied in the actual construction situations and a quite good result was achieved. As the amount of design and construction of underground engineering goes up, the radial slip casting technology will be applied more widely. |
keywords:yuanliangshan tunnel radial slip casting boundary conditions grouting materials grouting engineering |
查看全文 查看/发表评论 下载PDF阅读器 |