| 对接井钻井靶点位置问题探讨 |
| 投稿时间：2015-07-31 修订日期：2015-11-27 点此下载全文 |
| 引用本文：武程亮.对接井钻井靶点位置问题探讨[J].钻探工程,2016,43(1):58-60,65.WU Cheng-liang. Discussion on Drilling Target Location of Connected Wells[J]. Drilling Engineering, 2016,43(1):58-60,65. |
| 摘要点击次数: 1162 |
| 全文下载次数: 982 |
|
|
| 中文摘要:传统观念认为从钻井轨迹的计算得出的中靶精度即为实际中靶精度，随着钻井技术及测量技术的不断发展，这种观念在被逐渐打破。在数学计算模型中的靶点位置与实际的靶点位置有相当大的出入，即使使用主动磁测量技术测得的靶点位置也是存在不确定性。由H1-H2井组的对接施工过程作为案例，分析出现这种不确定性的原因，以及在施工中采取主动的手段完成工程任务，以达到施工目的。 |
| 中文关键词:钻井工程 对接井 钻井靶点 中靶精度 数学中靶 地理中靶 |
| |
| Discussion on Drilling Target Location of Connected Wells |
|
|
| Abstract:In the traditional view, the target accuracy derived from the calculation of the drilling trajectory is the actual target accuracy, but along with the development of drilling technology and measurement technology, this concept is gradually broken. There is considerable discrepancy between the target location calculated by mathematical calculation model and the actual location in practical operation, even the target location measured by active magnetic measurement technology is uncertain. With H1-H2 well group as the case, the reasons of this uncertainty are analyzed and active means were adopted to complete the project in the construction. |
| keywords:drilling engineering connected wells drilling target target accuracy targeting based on calculation targeting in practice operation |
| 查看全文 查看/发表评论 下载PDF阅读器 |
