空气反循环连续取样钻进技术在紫金山金铜矿区的应用 |
投稿时间:2016-07-26 修订日期:2017-03-30 点此下载全文 |
引用本文:李汞,王德龙,王占丑,等.空气反循环连续取样钻进技术在紫金山金铜矿区的应用[J].钻探工程,2017,44(6):45-47,51.LI Gong,WANG De-long,WANG Zhan-chou,et al. Application of Air Reverse Circulation Continuous Sampling Drilling Technology in Zijinshan Gold-copper Mine[J]. Drilling Engineering, 2017,44(6):45-47,51. |
摘要点击次数: 1144 |
全文下载次数: 787 |
|
|
中文摘要:紫金山金铜矿矿产勘查中使用空气反循环连续取样钻进工艺,解决破碎地层、缺水地区钻探取样难、施工成本高的问题。介绍了机具的配套、钻进工艺流程及施工注意事项,特别是针对紫金山金铜矿区破碎、漏失地层,为提高钻进效率,采用正反循环2种潜孔锤钻进,获得了高的采样率,提高了施工效率,大幅度降低了施工成本。 |
中文关键词:空气潜孔锤钻进 反循环连续取样 双壁钻杆 紫金山金铜矿区 |
|
Application of Air Reverse Circulation Continuous Sampling Drilling Technology in Zijinshan Gold-copper Mine |
|
|
Abstract:In the mineral exploration of Zijinshan gold-copper mine, air reverse circulation continuous sampling drilling technology was used to solve the problems of the broken formation drilling, the difficult sampling in water-deficient area and the high construction cost. This thesis introduces machines matching, drilling process and attentions of construction; especially in broken and leakage formation of Zijinshan gold-copper mine, normal and reverse circulation DTH drilling were used to improve drilling efficiency, high sampling rate is received with improved construction efficiency and reduced cost. |
keywords:air DTH drilling reverse circulation continuous sampling dual-wall drill pipe Zijinshan gold-copper mine |
查看全文 查看/发表评论 下载PDF阅读器 |