广东珠海大桥直径2m桥桩孔成孔施工实践
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

U443.15

基金项目:


2m Diameter Zhuhai Bridge Bored Pile HOle Completion in Guandong Province
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    在珠海大桥桥桩孔的成孔施工实践中采用了滚刀钻头、泵吸反循环工艺,施工2.0m和2.2m大口径桥桩孔,对施工工艺参数、水上平台作业对大口径施工机械设备的技术要求、事故处理以及滚刀钻头在软土地层中钻进的可行性等方面进行了探讨。

    Abstract:

    Rooer bits and pump suction reverse circulation teehnique are applied in completion of 2.0mand2.2m diameter bridge bored pile hole in construction of Zhuhai bridge paramerers technical requirements onoperating large diameter, mechanical equipment on off-shore platform,accidental remedying and feasibility of drillingwith bits in soft formations are discussed.

    参考文献
    相似文献
    引证文献
引用本文

连鹿声.广东珠海大桥直径2m桥桩孔成孔施工实践[J].钻探工程,1994,(1):16-18.
Lian Lusheng. 2m Diameter Zhuhai Bridge Bored Pile HOle Completion in Guandong Province[J]. Drilling Engineering, 1994,(1):16-18.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期:
  • 出版日期: 1994-01-25