| 模拟深井条件下的牙轮钻头单齿破岩试验 |
| 点此下载全文 |
| 引用本文：王克雄,夏宏南,翟应虎,蔡镜仑.模拟深井条件下的牙轮钻头单齿破岩试验[J].钻探工程,1996,(6):34-36.. Roller-cone Bit Single Tooth Testing under Simulated Borehole Condition[J]. Drilling Engineering, 1996,(6):34-36. |
| 摘要点击次数: 1014 |
| 全文下载次数: 289 |
| 王克雄 夏宏南 翟应虎 蔡镜仑 |
| 石油大学 |
|
| 中文摘要:利用深井破岩试验装置，模拟了不同井深（０～５ｋｍ）压力条件下对泥岩进行牙轮钻头单齿破岩试验，试验结果得出：随着井深（围压）的增加，岩石硬度增加，破碎岩石的力增加，岩石破碎体积减小，岩石破碎功增加，这是机械钻速低的根本原因，因此必须解决深井条件下的牙轮钻头齿形和布齿方式，以适应深井地层的钻进，达到提高机械钻速的目的。 |
| 中文关键词:深井，围压，牙轮钻头单齿，岩石强度，破碎功，机械钻速 |
| |
| Roller-cone Bit Single Tooth Testing under Simulated Borehole Condition |
| Wang Kexiong Xia Hongnan Zhai Yinghu Cai Jinglun |
| University of Petroleum Beijing 102200 |
|
| Abstract:This paper describes the single tooth test for studying the rock breaking process of roller-cone bits in mud rock under simulated downhole pressure conditions (from 0 to 5000m). The tests are carried out under the laboratory condition using deep-well rock breaking tester. The results indicate that the penetration rate slows down with depth is attributed to increasing rock hardness,increasing cutter forces,increasing specific energy and decreasing volume of broken rock with well depth increasing. Therefore,it is necessary to determine the cutter shape and the cutteroplacement pattern in order to fit deep formation drilling and increase the rate of penetration. |
| keywords:deep well confining pressure roller-cone bit rock strength specific energy rate of penetration, |
| 查看全文 查看/发表评论 下载PDF阅读器 |
