PDC钻头在天津地热井中的应用
投稿时间：2009-11-25  修订日期：2010-01-27  点此下载全文
引用本文：马忠平,杜槟,李振杰,等.PDC钻头在天津地热井中的应用[J].钻探工程,2010,37(7):12-14.
MA Zhong-ping,DU Bin,LI Zhen-jie,et al. Application of PDC Bit in Geothermal Well in Tianjin[J]. Drilling Engineering, 2010,37(7):12-14.
摘要点击次数: 1066
全文下载次数: 1119
作者单位E-mail
马忠平* 天津地热勘查开发设计院 ma_zhongping@sina.com 
杜槟 天津地热勘查开发设计院  
李振杰 天津地热勘查开发设计院  
杨忠彦 天津地热勘查开发设计院  
庞海 天津市地质工程勘察院  
中文摘要:天津地热钻井，一般采用传统的三牙轮钻头进行施工，近年来随着钻井工艺水平的进步，为了提高钻井效率，在部分井段中采用PDC钻头钻进，相比三牙轮钻头取得了更高的机械钻速，且泥岩地层造浆得到很好的控制，钻井液性能稳定,降低了维护成本。实践证明，PDC钻头使用寿命长，在提高钻进效率的同时经济效益显著。
中文关键词:地热井  PDC钻头  机械钻速  天津
 
Application of PDC Bit in Geothermal Well in Tianjin
Abstract:Geothermal well in Tianjin used to be constructed by traditional three-cone bit. With the development of drilling technology in recent years, PDC bit was adopted in some well sections to improve the drilling efficiency and mud making in mudstone formation was well controlled with steady performance of drilling fluid and lowered maintenance cost. PDC bit has long service life, which can improve drilling efficiency with obvious economical benefit.
keywords:geothermal well  PDC bit  penetration rate  Tianjin
查看全文  查看/发表评论  下载PDF阅读器