江西省浮梁县朱溪矿区深孔钻探施工技术研究 |
投稿时间:2010-11-07 修订日期:2011-03-05 点此下载全文 |
引用本文:黄忠高,李志强,杨启文.江西省浮梁县朱溪矿区深孔钻探施工技术研究[J].钻探工程,2011,38(5):23-27.HUANG Zhong-gao,LI Zhi-qiang,YANG Qi-wen. Study on Deep Hole Drilling in Zhuxi Mining Area of Jiangxi[J]. Drilling Engineering, 2011,38(5):23-27. |
摘要点击次数: 1186 |
全文下载次数: 895 |
|
|
中文摘要:详细介绍了朱溪矿区3个深孔钻遇地层、钻探设备、钻孔结构、钻头使用、起大钻、冲洗液使用、护孔堵漏、套管使用等具体情况。重点分析和总结了钻孔结构、钻头使用、冲洗液使用、护孔堵漏等钻探工艺技术,并提出今后深孔施工需慎重配套钻探设备、增大钻头外径、提高钻探效率、重视深孔孔斜尤其是方位超差和灰岩溶洞问题等建议。 |
中文关键词:深孔钻探 绳索取心 金刚石钻头 工艺技术 朱溪矿区 |
|
Study on Deep Hole Drilling in Zhuxi Mining Area of Jiangxi |
|
|
Abstract:The paper introduced 3 deep holes construction in Zhuxi mining area about the drilling formation, drilling equipment, borehole structure, bit application, drill string lifting, washing fluid application, wall protection & lost circulation control and casing situation. Analysis and summery emphasized the drilling technologies of borehole structure, bit application and wall protection & lost circulation control. Some suggestions were made for deep hole construction on drilling equipment matching; outside bit diameter increasing; drilling efficiency improvement; hole deviation, especially azimuth out of tolerance and karst cave. |
keywords:deep hole drilling wire-line coring diamond bit technology Zhuxi mining area |
查看全文 查看/发表评论 下载PDF阅读器 |
|
|
|