基于ANSYS Workbench的GDZ-300L型钻机动力头托架优化设计 |
投稿时间:2013-06-25 修订日期:2013-06-25 点此下载全文 |
引用本文:黄晓林,奎中.基于ANSYS Workbench的GDZ-300L型钻机动力头托架优化设计[J].钻探工程,2013,40(7):93-96.HUANG Xiao-lin,KUI Zhong. Optimization Design of Power Head Bracket of GDZ-300L Drill Based on ANSYS Workbench[J]. Drilling Engineering, 2013,40(7):93-96. |
摘要点击次数: 847 |
全文下载次数: 650 |
|
基金项目:中国地质调查局地质大调查项目“深厚覆盖层大直径跟管快速钻进工艺应用示范”(12120113097000) |
|
中文摘要:采用ANSYS Workbench对改进后的GDZ-300L型钻机动力头托架进行有限元分析,论证其结构的安全可靠性;利用软件中的Design-Xplorer VT多目标优化模块对托架进行优化设计,分析各板件厚度对托架的等效应力、质量大小的影响,在保证结构强度的前提下,得出一组最优方案,达到节省结构耗材,降低制造成本的目的。 |
中文关键词:动力头托架 ANSYS Workbench 有限元分析 多目标优化 钻机 |
|
Optimization Design of Power Head Bracket of GDZ-300L Drill Based on ANSYS Workbench |
|
|
Abstract:Finite element analysis was made on the modified power head bracket of GDZ-300L drill with ANSYS Workbench to demonstrate the safety and reliability of the structure; the power head bracket design was optimized by using software of Design-Xplorer VT multi-objective optimization model, the influence of each panel thickness to the bracket in equivalent stress and mass are analyzed. On the premise of ensuring the structure strength, a set of optimal solutions are obtained to save structure material and reduce manufacturing cost. |
keywords:power head bracket ANSYS Workbench finite element analysis multi-objective optimization drill |
查看全文 查看/发表评论 下载PDF阅读器 |