基于Solidworks的钻机底座有限元分析 |
投稿时间:2013-10-17 修订日期:2013-11-11 点此下载全文 |
引用本文:马红月,刘子厚,李斌,等.基于Solidworks的钻机底座有限元分析[J].钻探工程,2014,41(2):48-51.MA Hong-yue,LIU Zi-hou,LI Bin,et al. Finite Element Analysis on Rig Substructure Based on Solidworks[J]. Drilling Engineering, 2014,41(2):48-51. |
摘要点击次数: 1001 |
全文下载次数: 923 |
|
|
中文摘要:根据5000 m钻机底座的实际结构和特点,建立三维模型,使用ANSYS Workbench对底座模型加载,在不同工况下对底座进行有限元分析,完成钻机底座的整体静态特性分析,判定底座是否满足强度、刚度需求。 |
中文关键词:钻机底座 有限元分析 Solidworks |
|
Finite Element Analysis on Rig Substructure Based on Solidworks |
|
|
Abstract:According to the actual structure and the characteristics of 5000m rig substructure, three-dimensional model was established which was loaded by the use of ANSYS Workbench, based on the finite element analysis on the substructure under different conditions, the analysis was completed on the static characteristics of the rig substructure to determine whether the substructure meet the requirements of strength and stiffness. |
keywords:rig substructure finite element analysis Solidworks |
查看全文 查看/发表评论 下载PDF阅读器 |