球卡式绳索取心液动锤的试验研究 |
投稿时间:2015-01-27 修订日期:2015-01-27 点此下载全文 |
引用本文:王跃伟,齐力强,李晨阳,等.球卡式绳索取心液动锤的试验研究[J].钻探工程,2015,42(4):44-47.WANG Yue-wei,QI Li-qiang,LI Chen-yang,et al. Experimental Study on Ball Latch Wire-line Coring Hydro-hammer[J]. Drilling Engineering, 2015,42(4):44-47. |
摘要点击次数: 940 |
全文下载次数: 693 |
|
基金项目:中国地质调查局地质调查项目“3000 m深孔绳索取心液动锤及钻进工艺研究与应用”(编号:12120113016300) |
|
中文摘要:针对现有SYZX系列绳索取心液动锤中存在的内管总成上浮问题,研制了球卡式绳索取心液动锤,改善了内管总成浮动问题,增大了冲击功输出,进一步提高了钻进效率。室内和生产试验证实,该球卡式绳索取心液动锤钻具原理可行,打捞和定位成功率在95%以上。但在生产实践中还需要对局部细节进行完善。 |
中文关键词:绳索取心液动锤 球卡定位 液动冲击回转钻进 内管总成上浮 |
|
Experimental Study on Ball Latch Wire-line Coring Hydro-hammer |
|
|
Abstract:Ball latch wire-line coring hydro-hammer was developed to solve the inner tube assembly fluctuation of existing SYZX series wire-line coring hydro-hammers, by which, the output impact work is increased with further drilling efficiency improvement. The indoor and production tests confirm that the principle of ball latch wire-line coring hydro-hammer drilling tool is feasible. The fishing and positioning reliability of this hammer are more than 95%, but some partial details still need to be improved in future productive practice. |
keywords:wire-line coring hydro-hammer ball latch positioning hydraulic percussive-rotary drilling inner tube assembly fluctuation |
查看全文 查看/发表评论 下载PDF阅读器 |