| JDT-6陀螺测斜仪软件GyroSProcess设计与实现 |
| 投稿时间：2015-10-10 修订日期：2015-10-10 点此下载全文 |
| 引用本文：陈华北,李聚光.JDT-6陀螺测斜仪软件GyroSProcess设计与实现[J].钻探工程,2016,43(1):31-35,39.CHEN Hua-bei,LI Ju-guang. Design and Implementation of the Accompanying Software GyroSprocess for Gyro-inclinometer JDT-6[J]. Drilling Engineering, 2016,43(1):31-35,39. |
| 摘要点击次数: 1049 |
| 全文下载次数: 931 |
|
|
| 中文摘要:针对JDT-6陀螺测斜仪配套软件“陀螺测斜仪JDT-6”在使用过程中显露出的同时需要串、并口进行通信，仍无法脱离Windows98操作系统现象，并根据工程实践中提出的新要求采用VB6开发了适用于这款仪器的软件GyroSProcess。新软件除涵盖原功能外，还在数据通信方面将串、并两条通道合二为一个USB口或COM口；导入已有测斜数据，减少数据采集量，提高测斜作业效率；计算机自动控制绞车的运行，使数据采集过程自动化；运用对象编程技术，将测斜图件转成AutoCAD形式。介绍了新软件部分增加功能中采用的关键技术、算法。经现场试验，证明GyroSProcess软件的测量结果与旧软件结果一致，可替代旧软件而成为JDT-6陀螺测斜仪的新一代配套软件。 |
| 中文关键词:陀螺测斜仪 JDT-6 GyroSProcess 冻结孔 作业自动化 |
| |
| Design and Implementation of the Accompanying Software GyroSprocess for Gyro-inclinometer JDT-6 |
|
|
| Abstract:While using the original bundled software of gyro-inclinometer JDT-6, serial and parallel ports have to be used at the same time for communication and the software only works with Windows 98 and according to the new requirement in engineering practice, the software GyroSProcess was developed for gyro-inclinometer JDT-6 by VB6. In addition to covering the original functions, this new software has the following advantages: the serial and parallel channels are combined into one USB or COM port; the existing survey data can be imported to GyroSprocess with data acquisition workload reduced and the efficiency of deviation survey improved; the winch operation is controlled automatically by computer, which enables data acquisition process automation; by oriented programming technology, the inclination survey maps can be converted to AutoCAD format. The paper introduces key technologies and algorithm adopted for function adding on this new software. The site test shows that the measuring result by GyroSProcess software is the same as that by the old one. Therefore, GyroSprocess will replace the old software as new accompanying software of gyro-inclinometer JDT-6. |
| keywords:gyro-inclinometer JDT-6 GyroSProcess freazing hole operation automation |
| 查看全文 查看/发表评论 下载PDF阅读器 |
