4/6/2025, 6:22:43 PM 星期日
全液压自动送钻技术控制系统的研究
CSTR:
作者:
作者单位:

中煤科工集团重庆研究院有限公司

中图分类号:

P634.3;TD41

基金项目:

国家科技重大专项资助项目(编号:2011ZX05040-004)


Study on the Control System of Full Hydraulic Auto-drilling
Author:
Affiliation:

hongqing Research Institute of China Coal Technology and Engineering Group

  • 摘要
  • | |
  • 访问统计
  • |
  • 参考文献 [15]
  • |
  • 相似文献 [20]
  • |
  • 引证文献
  • | |
  • 文章评论
    摘要:

    本文结合全液压动力头式地面煤层气钻机的结构特点,根据给进机构数学模型及钻压控制经验公式,建立钻压控制模型,设计模糊PID控制器并进行了仿真分析。通过改变门限钻压值和岩石可钻性系数值大小,模拟钻进过程中地层变化和被控对象参数变化对系统的影响,经过仿真分析得出系统的响应速度快,超调量小,具有较好的适应能力和抗干扰能力。因此,用模糊控制来实现恒钻压控制是可行的,对实现钻机的自动化、智能化控制具有一定的指导意义。

    Abstract:

    The drilling pressure control model was established based on the structural characters of full hydraulic driving head ground coalbed gas drilling rig, feed mechanism mathematical models and drilling pressure control experience formulae; the fuzzy PID controller was designed and simulation analysis was carried out. By adjusting the coefficients value of threshold pressure value and rock drillability value, the influence of the different strata and the parameters of controlled objects in drilling courses on auto-drilling system were simulated and the simulation analysis indicates that this system has good adaptability and anti-interference ability with high response speed and small overshoot. Therefore, it is feasible to realize constant drilling pressure by fuzzy control, which has guiding value for automation and intelligent control of drilling machine.

    参考文献
    [1]周德昶,焦先军.地面钻井抽采瓦斯技术的发展方向[J].矿业安全与环保,2006,33(12):77-79,88.
    [2]冯德强.钻机设计[M].武汉:中国地质大学出版社,1993.2~4,316~327.
    [3]关景泰,温济全.机电液控制技术[M].上海:同济大学出版社.2003.1~6.
    [4]吴根茂,邱敏秀,王庆丰等.新编实用电液比例技术[M].杭州:浙江大学出版社.2006.1~12,156~166.
    [5]鄢泰宁.岩土钻掘工程学[M].武汉:中国地质大学出版社.2006.88~100,24~26.
    [6]张运生,杨帆.基于广义小脑模型神经网络的钻机自动送钻系统控制与仿真[J].成都电子机械高等专科学校学报.2007,40(3):6~9.
    [7]王沣涛,朱小平.基于DRNN神经网络的石油钻机自动送钻系统智能控制研究[J].内蒙古石油化工.2006,(12):158~160.
    [8]史玉升.基于人工智能的自动送钻监控技术[J].石油机械,2000,28(1):28~31.
    [9]王平,赵清杰,杨汝清.石油钻机智能送钻技术研究[J].石油机械.2006,34(12):54~58.
    [10]高岩.石油钻机自动送钻智能控制系统[D].西安建筑科技大学,2004.
    [11]许贤良,刘利国.关于负载压力和负载流量的讨论[J].机床与液压,1995,(4):214~216.
    [12]聂松林.对称伺服阀控制单出杆液压缸的特性分析[J].武汉冶金科技大学学报,1997,20(1):86~90.
    [13]肖志权,邢继峰,朱石坚.长行程阀控非对称缸建模分析[J].流体传动与控制.2007,(1):19~22.
    [14]诸静.模糊控制原理与应用[M].北京:机械工业出版社.2005.303~326.
    [15]席爱民.模糊控制技术[M].西安:西安电子科技大学出版社.2008.75~76
引用本文

闫保永.全液压自动送钻技术控制系统的研究[J].钻探工程,2016,43(6):64-67.
YAN Bao-yong. Study on the Control System of Full Hydraulic Auto-drilling[J]. Drilling Engineering, 2016,43(6):64-67.

复制
分享
文章指标
  • 点击次数:1177
  • 下载次数: 1117
  • HTML阅读次数: 201
  • 引用次数: 0
历史
  • 收稿日期:2015-12-18
  • 最后修改日期:2015-12-18
  • 录用日期:2016-02-25
  • 在线发布日期: 2016-06-16
文章二维码