1/24/2025, 7:45:01 AM 星期五
φ127 mm涡轮钻具在干热岩钻井取心钻进中的试验研究
CSTR:
作者单位:

北京探矿工程研究所,北京探矿工程研究所,北京探矿工程研究所,北京探矿工程研究所

中图分类号:

P634

基金项目:

中国地质调查局地质调查项目“小口径孔底动力钻进关键技术攻关及应用研究”(编号:12120113017500);国际科技合作项目“地质深孔小口径孔底动力安全钻探技术研究”(编号:2011DFR71170)


Experimental Research on the Application of 127mm Turbodrill in Hot Dry Rock Core Drilling
Author:
Affiliation:

Beijing Institute of Exploration Engineering,Beijing Institute of Exploration Engineering,Beijing Institute of Exploration Engineering,Beijing Institute of Exploration Engineering

  • 摘要
  • | |
  • 访问统计
  • |
  • 参考文献 [27]
  • |
  • 相似文献
  • | | |
  • 文章评论
    摘要:

    干热岩地层以火成岩为主,地层温度高,可钻性差。为解决干热岩钻探机械钻速低、钻具磨损严重等问题,针对干热岩特点研制了一套耐高温φ127 mm涡轮钻具,并在福建省漳州市干热I井进行了试验,试验井段平均机械钻速与φ165 mm螺杆配合金刚石钻头相比提高了30.3%,与转盘配合牙轮钻头相比提高98.5%。试验结果表明,该φ127 mm涡轮钻具结构设计合理,能够满足干热岩高温钻探的需要。

    Abstract:

    The hot dry rock resource is mainly made up of volcanic with high temperature and poor drillability. In order to resolve the difficulties of low drilling speed and serious drilling tools wear, a set of φ127mm high-temperature turbodrill is designed and manufactured, which was tested in a hot dry rock well, the ROP were increased by 30.3% and 98.5% compared with φ165mm PDM + diamond bit and rotary table matching cone bit respectively. The experiment results show that this φ127mm turbodrill has reasonable structure design and is suitable for the high-temperature hot dry rock drilling.

    参考文献
    [1] 蔺文静,刘志明,马峰,刘春雷,王贵玲.我国陆区干热岩资源潜力估算[J].地球学报,2012(5),807-811
    [2] William C. Maurer. Program to develop improved downhole drilling motors semiannual report[R]. Houston: Maurer Engineering, Inc.,1976;
    [3] Donald W. Brown, David V. Duchane, Grant Heiken, et al. Mining the earth’s heat: hot dry rock geothermal energy[M]. Springer-Verlag Berlin and Heidelberg:267, 303.
    [4] (法)W. 泰拉斯波尔斯基, 著. 李克向, 姜义忠, 胡泽明, 译. 井下液动钻具[M]. 北京: 石油工业出版社,1991:9~122
    [5] Schlumberger,Inc. Neyrfor Specification Handbook. 2011
    [6] Leo Koot et al. Bent-housing turbodrills improve hard formation directional drilling. Oil and Gas Journal. 1993,214(2):63~66
    [7] Derkach N D,Krutik E N,Korotaev Yu A.Gear Reduction Turbordrills Improve Drilling Results.SPE 49258,1998
    [8] 冯定. 国产涡轮钻具结构及性能分析[ J ]. 石油机械,2007, 35 (1) : 59 - 61.
    [9] 江汉石油学院井下工具研究室. 175 型无橡胶元件涡轮钻具的研制与试验[J]. 石油机械,1999,27(12),31~33
    [10] 杨世奇,薛敦松,蔡镜仑,赵宁,谭春飞.涡轮钻井技术的新进展[J].石油大学学报(自然科学版).2002, 26(3):128~132
    [11] 王伟. 国内外减速涡轮钻具的发展现状[J] . 科技资讯,2006 (27) :44~46.
    [12] Langilic, P., Deen, A., Klasscn, J., "Minimizing Risks, Maximizing On-Boltom Drilling Time: Turbodril1ing with Impregnated Bits Improves Efficiency and Circumvents Trouble Time, Southern Oklahoma" paper SPE/lADC 119230, presentation al the SPEJIADC Drilling Conference and Exhibition, Amsterdam, The Netherlands, 17-19 March 2009.
    [13] Hugh H. Donald. A New Approach To Drilling Hard Chert Contaminated Carbonate Formations In Kazakhstan, SPE 139412 ,2010
    [14] Gabriel. c., Farid, U., Albrechl M., Cook, P., Fcroze, N., Nevlud, K,: "Innovative Solution for Drilling Pre-Khuff Formations in Saudi Arabia Utilizing Turbodrill and Impregnated Bits" paper SPE 120367 presemed at the SPE Middle East Oil Gas Show and Conference, Bahrain, 15-18 March 2009.
    [15] Heywood, c., Cunie, A., Robson, D., Cascy, P.: "Recent Material and Geometrical Chalnges in lmpreg Technology on Turbine Drive Load to Reduced Drilling Costs in Hard Rock Application" paper SPE/lADC 97443 presented at the SPE/lADC Middle East Drilling Technology Conference Exhibition. Dubai, UAE, 12-14 Sept 2005.
    [16] 李飞,谢庆繁,冯定. 新型减速涡轮钻具应用研究[J] . 江汉石油学院学报,2005 ,27 (4) :698~700
    [17] 谭春飞, 蔡镜仑. 利用涡轮钻具提高深井钻速的试验研究[J]. 石油钻探技术, 2003, 31( 5): 30~32.
    [18] 陈洪兵, 周龙昌, 张雷, 等. 俄罗斯减速器涡轮钻具驱动PDC 钻头在西伯利亚油田的成功应用[ J] . 石油钻探技术, 2005, 33( 2) : 48~50.
    [19] 成汉模等. 涡轮钻具在海拉尔油田的应用及效果分析[J]. 中国新技术新产品,2013,7,32
    [20] Mark Natanael, et al. Turbodrill with asymmetric stator and rotor vanes[P]. Houston: Smith International, Inc., 2005;
    [21] Shumilov Valerian Petrovich(RU), et al. Turbodrill turbine[P]. Moskva: OOO”GZD TEkhnologija(RU)”, 2006;
    [22] 谭春飞. 线投影叶片涡轮定转子组合件及涡轮马达[P]. 北京: 中国石油大学(北京), 2014;
    [23] 刘孝光,潘培道,胡昌军.涡轮钻具叶栅水力性能仿真优化技术研究[J].冶金设备,2007,2(1):21~28
    [24] 赵志涛,翁炜,黄玉文等.Φ89涡轮钻具叶栅设计及性能预测[J]. 地质与勘探, 2013,49(6):1176-1180
    [25] 刘彦昌等.涡轮叶片溶模铸造工艺研究[J].机械工程师,2008,(8):159-160.
    [26] Timothy N. Sexton, Craig H. Cooley. Bearing elements, and bearing apparatuses and motor assembles using same[P]. Orem: US SYNTHETIC CORPORATION, 2010;
    [27] 赵志涛,翁炜等. 一种孔底动力钻具双向载荷滑动止推轴承[P]. 中国,实用新型专利,ZL 201320343385.2
    相似文献
    引证文献
引用本文

翁炜,张德龙,赵志涛,等.φ127 mm涡轮钻具在干热岩钻井取心钻进中的试验研究[J].钻探工程,2017,44(9):68-72.
WENG Wei, ZHANG De-long, ZHAO Zhi-tao, et al. Experimental Research on the Application of 127mm Turbodrill in Hot Dry Rock Core Drilling[J]. Drilling Engineering, 2017,44(9):68-72.

复制
分享
文章指标
  • 点击次数:1066
  • 下载次数: 1021
  • HTML阅读次数: 202
  • 引用次数: 0
历史
  • 收稿日期:2017-05-07
  • 最后修改日期:2017-07-15
  • 录用日期:2017-07-19
  • 在线发布日期: 2017-10-30
文章二维码