河南省寺家沟银多金属矿区复杂地层绳索取心钻进技术
投稿时间:2018-07-15  修订日期:2019-01-16  点此下载全文
引用本文:时志兴.河南省寺家沟银多金属矿区复杂地层绳索取心钻进技术[J].钻探工程,2019,46(3):31-35,41.
SHI Zhixing. Wireline core drilling in complex strata in Sijiagou silverpolymetallic mine of Henan Province[J]. Drilling Engineering, 2019,46(3):31-35,41.
摘要点击次数: 1134
全文下载次数: 648
作者单位E-mail
时志兴* 河南省有色金属地质矿产局第一地质大队 765181609@qq.com 
中文摘要:河南省陕县崤山地区寺家沟-宽平一带银多金属矿区ZKS001孔,设计孔深900 m,直孔。上部地层坚硬破碎,裂隙发育,漏失严重,坍塌掉块,进尺缓慢,取心困难,钻进过程中钻头、钻杆磨损严重,造成多次钻杆断裂事故。钻孔位于山沟交汇处,严重涌水,从200~460 m,多处存在夹层泥,钻孔缩径。施工时由于钻进技术措施不当,导致钻进困难,引发事故,延误工期,增加了施工成本。本文介绍了该孔钻探施工技术措施,总结的经验教训可供类似工程参考借鉴。
中文关键词:岩心破碎  钻孔漏失  涌水  钻杆断裂  优质冲洗液
 
Wireline core drilling in complex strata in Sijiagou silverpolymetallic mine of Henan Province
Abstract:This paper mainly introduces drilling of Hole ZKS001 in the silver polymetallic mine in the Sijiagou-Kuanping section, Xiaoshan District, Shan County, Henan. It is a straight hole with the design depth of 900m. The upper strata are hard, broken, with well developed fractures, serious leakage, and falling blocks. There were many difficulties in drilling in this zone such as low penetration rate, difficult coring, serious wear of drill bits, which resulted in drill pipe fractures many times during drilling. The drill hole is located at the intersection of the valley and gully with serious water gushing. Many mud interbedds are present between the borehole depth of 200m and 460m, which resulted in borehole diameter shrinkage. During drilling, due to improper handling of many drilling technical measures, drilling was difficult, and accidents often happened, delaying the construction period and increasing the construction cost, which should be taken as a lesson for future operations.
keywords:core breakage  leakage in drilling holes  water gushing  breaking of drill pipe  high quality drilling fluid
查看全文  查看/发表评论  下载PDF阅读器