隆探X3井基岩定向井钻井设计与施工
投稿时间:2019-03-03  修订日期:2019-06-03  点此下载全文
引用本文:段晓岩.隆探X3井基岩定向井钻井设计与施工[J].钻探工程,2019,46(7):57-63.
DUAN Xiaoyan. Design and drilling of directional Well Longtan X3 in bed rock[J]. Drilling Engineering, 2019,46(7):57-63.
摘要点击次数: 1111
全文下载次数: 589
作者单位E-mail
段晓岩* 中国石油大庆钻探工程公司钻井工程技术研究院 674265411@qq.com 
中文摘要:为确保大庆油田首口基岩定向井隆探X3井的安全顺利钻进,针对该井存在易井漏井斜、易井壁失稳、岩石硬度大、可钻性差、井眼净化难等技术难点,在工程设计中的井身结构、钻具组合、钻头优选、钻井液优选、井眼清洁等方面运用Landmark软件进行了大量的计算,同时通过统计分析和筛选,对该井工程设计进行了优化分析。在该井实钻过程中没有出现井下事故,钻井施工顺利,说明该井钻井设计合理,施工措施合理,有效地克服了钻井施工过程中存在的难题。
中文关键词:基岩  钻井设计  井身结构  钻具组合  钻头  钻井液  井眼清洁
 
Design and drilling of directional Well Longtan X3 in bed rock
Abstract:In order to ensure the safe and smooth drilling of Well Longtan X3, the first directional well to be drilled in bed rock, a lot of calculation has been done in the drilling engineering design with the Landmark software on the well structures, BHA, bit optimization, drilling fluid optimization and borehole cleaning to cope with the tricky issues such as circulation loss, well deviation and wellbore instability, poor drillability of hard rocks, difficult borehole cleaning; at the same time, statistical analysis and screening were made for optimizing of the engineering design. As a result, drilling operations have been carried out successfully without any accidents, indicating that the engineering design was proper, and the technical difficulties in drilling operations can be overcome.
keywords:bed rock  drilling design  well structure  BHA  bit  drilling fluid  borehole cleaning
查看全文  查看/发表评论  下载PDF阅读器