关于利用系统论方法设计金刚石钻头的分析研究
投稿时间:2019-03-31  修订日期:2019-03-31  点此下载全文
引用本文:汤凤林,Чихоткин A. B.,段隆臣,等.关于利用系统论方法设计金刚石钻头的分析研究[J].钻探工程,2020,47(1):13-19.
TANG Fenglin,CHIKHOTKIN A. B.,DUAN Longchen,et al. Analytical research on design of diamond drill bits with the system theory approach[J]. Drilling Engineering, 2020,47(1):13-19.
摘要点击次数: 1157
全文下载次数: 678
作者单位E-mail
汤凤林* 中国地质大学(武汉)工程学院 fltang_wuhan@aliyun.com 
Чихоткин A. B. 中国地质大学(武汉)工程学院  
段隆臣 中国地质大学(武汉)工程学院  
潘秉锁 中国地质大学(武汉)工程学院  
谭松成 中国地质大学(武汉)工程学院  
Чихоткин В. Ф. 中国地质大学(武汉)工程学院  
基金项目:国家自然科学基金面上项目“基于张力环试验的热压钻头WC-Cu基胎体对金刚石把持力的定量研究”(编号:41672364,2017-2020)
中文摘要:地质钻探工程是个复杂的系统工程,金刚石钻头设计是个复杂的系统。俄罗斯技术科学博士Скоромных В. В.教授等使用系统论方法设计表镶金刚石钻头,以机械钻速为目标函数,以钻头切入岩石深度为切入点,建立了相关的数学模型,编制了程序,进行了计算机模拟,可以比较直观地看到金刚石在孔底的工作情况和钻头破碎岩石的过程,对于深入研究孔底岩石破碎过程机理和判断金刚石钻头设计的合理性及其对钻探技术经济指标的作用,具有一定的实际意义。
中文关键词:地质钻探工程  金刚石钻头  系统论  计算机模拟  岩石破碎过程  技术经济指标
 
Analytical research on design of diamond drill bits with the system theory approach
Abstract:Geological drilling engineering is a complicated system engineering and design of diamond bits is a complicated system. Russian Doctor of technical sciences and Professor Skoromnyh V.V. and others have designed surface set diamond drill bits using the system theory approach, where the mechanical penetration rate is taken as the objective function with the cutting depth of the drill bit as a cut-in point to build the mathematical model, and develop the program to perform computer modeling. The modeling results allow the working situation of the diamonds in the bottom hole and rock fragmentation process to be seen more directly, which have some practical significance for in-depth research on the mechanism of rock fragmentation process and assessment of the rationality of the diamond bit design, and their influence on the technical and economical index of drilling.
keywords:geological drilling engineering  diamond drill bit  system theory  computer modeling  rock fragmentation process  technical and economical indexes
查看全文  查看/发表评论  下载PDF阅读器