钻井局域网实时监控设备研发
投稿时间:2020-05-27  修订日期:2020-09-13  点此下载全文
引用本文:韩晓玲,闫思江,韩文峰,等.钻井局域网实时监控设备研发[J].钻探工程,2020,47(12):30-35.
HAN Xiaoling,YAN Sijiang,HAN Wenfeng,et al. Research and development of real-time monitoring equipmentfor drilling local area network[J]. Drilling Engineering, 2020,47(12):30-35.
摘要点击次数: 1062
全文下载次数: 633
作者单位E-mail
韩晓玲* 青岛港湾职业技术学院山东 青岛 266404 576254627@qq.com 
闫思江 青岛港湾职业技术学院山东 青岛 266404  
韩文峰 东营荣利达石油设备有限公司山东 东营 257091  
张圣杰 青岛港湾职业技术学院山东 青岛 266404  
韩红玲 青岛港湾职业技术学院山东 青岛 266404  
基金项目:青岛港湾职业技术学院科技项目“石油钻井局域网监控设备研制”(编号:QDGW2017Z01)
中文摘要:为实现钻井指挥部对各钻井站点钻采工艺的远程监控,在前期钻井工艺参数自动实时监测的单机研发基础上,本文应用TIA portal软件进行主站从站组网监控研究,实验设备用Siemens1200PLC做主控机,用Siemens200PLC做从站控制机监控钻采现场工艺参数,通过主控机与各从站点组态,实现主控机对从站主从控制。装机后在钻采现场进行了无线网传输实验,实验结果表明:应用互联网通信技术解决无线网断点续传问题,能够实现了钻采实时监控数据短距离传输。
中文关键词:钻井  组态  主从监控  局域网  实时监控
 
Research and development of real-time monitoring equipmentfor drilling local area network
Abstract:In order to realize remote monitoring of the drilling process at each drilling station by the drilling headquarters, on the basis of the single station for automatic real-time drilling monitoring developed in the early stage, TIA portal software was applied to develope the master-slave station for drilling monitoring with Siemens1200PLC used as the master control equipment, and Siemens200PLC as the slave control equipment to monitor the drilling parameters at each drilling station. Master-slave controlling is realized through the configuration of the master control equipment and slave control equipment at each station. Internet was used to test transmission after the master-slave station was set up, and the results showed that internet can provide continuous transmission from breakpoint and short-distance transmission of real-time monitoring data on drilling.
keywords:drilling well  configuration  master-station monitor  local area network  real-time monitoring
查看全文  查看/发表评论  下载PDF阅读器