4000 m岩心钻机桅杆结构设计与有限元分析
投稿时间:2020-08-20    点此下载全文
引用本文:伍晓龙,刘凡柏.4000 m岩心钻机桅杆结构设计与有限元分析[J].钻探工程,2021,48(1):88-94.
WU Xiaolong,LIU Fanbai. Structural design and finite element analysis of the 4000m core drill mast[J]. Drilling Engineering, 2021,48(1):88-94.
摘要点击次数: 565
全文下载次数: 436
作者单位E-mail
伍晓龙* 中国地质科学院勘探技术研究所河北 廊坊 065000 wxl1987516@163.com 
刘凡柏 中国地质科学院勘探技术研究所河北 廊坊 065000  
基金项目:国家重点研发计划课题“大深度地质钻探技术装备集成及示范”(编号: 2018YFC0603401)、“煤层瓦斯赋存参数的地面准确测定技术及装备”(编号:2018YFC0808001)
中文摘要:桅杆是钻机的重要组成部分,本文对勘探技术所自主研制的4000 m地质岩心钻机桅杆进行了结构设计分析,为确保桅杆满足强度、风载等使用工况要求,在SolidWorks中完成桅杆的建模,运用ANSYS Workbench对桅杆装配体进行有限元分析,完成对桅杆结构强度和刚度的校核,并对其进行模态分析,得到前10阶固有频率和振型。与激振源进行对比,分析发现第1阶、第2阶固有频率与钻机转盘和起升系统频率有重叠,可能会发生共振。通过调节钻机转盘和起升系统转速避免发生共振,振动时最大变形处变形量较小,说明桅杆结构设计合理,能够满足实际应用要求,具有一定的工程应用价值。
中文关键词:岩心钻机  桅杆  结构设计  静力学分析  模态分析  有限元分析
 
Structural design and finite element analysis of the 4000m core drill mast
Abstract:The mast is an important part of the drill. This paper describes the structural design of the mast of the 4000m core drill independently developed by Institute of Exploration Technology. In order to ensure that the mast meets the requirements of working conditions such as strength, wind load, the mast model is created with SolidWorks, and ANSYS Workbench is used to carry out the finite element analysis for the mast assembly to verify the strength and rigidity of the mast structure, and perform the modal analysis to obtain the first 10 intrinsic vibration frequencies and modes. They are compared with the excitation sources, and the results show the first and second intrinsic frequencies overlap with the frequencies of the drilling turntable and hoisting system, which may cause resonance; thus, the rotating speed of the drilling rig turntable and hoisting system is adjusted to avoid resonance. As a result, the deformation amount is small at the maximum deformation position during vibration, indicating that the mast structural design is reasonable, and can meet the actual application requirements; therefor it has some value in engineering application.
keywords:core drill  mast  structural design  static analysis  modal analysis  finite element analysis
查看全文  查看/发表评论  下载PDF阅读器