钻井液冷却装置技术发展现状及展望
投稿时间:2023-07-14  修订日期:2023-11-21  点此下载全文
引用本文:朱浩铭,彭俊威,郗秦阳,等.钻井液冷却装置技术发展现状及展望[J].钻探工程,2024,51(2):8-14.
ZHU Haoming,PENG Junwei,XI Qinyang,et al. Technology development status and prospect of drilling fluid cooling equipment[J]. Drilling Engineering, 2024,51(2):8-14.
摘要点击次数: 216
全文下载次数: 330
作者单位邮编
朱浩铭 中油国家油气钻井装备工程技术研究中心有限公司陕西 宝鸡 721002
宝鸡石油机械有限责任公司陕西 宝鸡 721002 
721002
彭俊威* 中油国家油气钻井装备工程技术研究中心有限公司陕西 宝鸡 721002
宝鸡石油机械有限责任公司陕西 宝鸡 721002 
721002
郗秦阳 中油国家油气钻井装备工程技术研究中心有限公司陕西 宝鸡 721002
宝鸡石油机械有限责任公司陕西 宝鸡 721002 
721002
戴启平 中油国家油气钻井装备工程技术研究中心有限公司陕西 宝鸡 721002
宝鸡石油机械有限责任公司陕西 宝鸡 721002 
721002
李森 中油国家油气钻井装备工程技术研究中心有限公司陕西 宝鸡 721002
宝鸡石油机械有限责任公司陕西 宝鸡 721002 
721002
王博芳 中油国家油气钻井装备工程技术研究中心有限公司陕西 宝鸡 721002
宝鸡石油机械有限责任公司陕西 宝鸡 721002 
721002
唐霄 中油国家油气钻井装备工程技术研究中心有限公司陕西 宝鸡 721002
宝鸡石油机械有限责任公司陕西 宝鸡 721002 
721002
基金项目:中国石油天然气集团有限公司科学研究与技术开发项目“高端井筒工作液新材料新技术与装备研究”(编号:2021DJ4406)
中文摘要:随着国内油气钻井向着万米深井开发,钻井过程中井底温度越来越高,因此需要对钻井液降温冷却以保护井下工具仪器。而国内钻井液冷却装置普遍存在设备超大、超高以及设备冷却降温幅度不大的现状。本文从介绍国外钻井液冷却装置技术现状出发,阐述了国外钻井液冷却装置技术现状;同时结合国内钻井工况,重点分析了国内自然冷却、开式冷却、闭式冷却和强制冷却4种钻井液冷却装置的工作原理、优缺点和适应范围。结合国内钻井技术发展现状,为保障冷却装置降温效果,结合道路运输和环保要求,分析了冷却装置降温机理研究、工程适应性、应用局限性和装置可靠性等关键技术难题,提出了冷却装置技术研发思路,为开发研制适应性强、可靠性高和冷却效果显著的装置提供参考。
中文关键词:钻井液  冷却装置  换热器  冷却塔  制冷机组
 
Technology development status and prospect of drilling fluid cooling equipment
Abstract:With the development of domestic oil and gas drilling toward 10,000 meters deep wells, the bottom hole temperature is getting higher and higher, so the drilling fluid needs to be cooled to protect downhole tools. In domestic drilling fluid cooling devices, the equipment is generally oversized, ultra-high and the cooling range of equipment is small. This paper starts from the introduction of the technical status of drilling fluid cooling devices at abroad. The working principle, advantages and disadvantages, and application range of four kinds of drilling fluid cooling devices, including natural cooling, open cooling, closed cooling and forced cooling, are emphatically analyzed in combination with domestic drilling conditions. In order to ensure the cooling effect of the cooling device, the paper analyzes the key technical problems of cooling mechanism, engineering adaptability, application limitation and equipment reliability in combination with the requirements of roads and environmental protection, and puts forward the technical research and development ideas of the cooling device of the cooling device in combination with the domestic drilling situation, providing guidance for the development of devices with strong adaptability, high reliability and remarkable cooling effect.
keywords:drilling fluid  cooling equipment  heat exchanger  cooling tower  refrigeration unit
查看全文  查看/发表评论  下载PDF阅读器