The performances of superfine Fe-Co-Cu pre-alloyed powder SFP were tested, measured and analyzed. The sintered temperature of the powder decreased to 700 ℃, high relative density of fusion was proved to be 97%, in addition high hardness and abrasion resistance was achieved. The examination showed that the powder had less differ in size and better oxidation resistance than ultra-fine cobalt powder. Blending with other powder, different hardness and erosion resistance property could be achieved. In conclusion the pre-alloyed powder can match with the foreign products.
参考文献
相似文献
引证文献
引用本文
陈哲,刘一波,赵万林,等.超细预合金粉末在金刚石工具中的性能研究[J].钻探工程,2004,31(8):61-64.CHEN Zhe, LIU Yi-bo, ZHAO Wan-lin, et al. Research on Performance of Superfine Fe-Co-Cu Pre-alloy Powder in Diamond Tools[J]. Drilling Engineering, 2004,31(8):61-64.