天然气水合物保真取样钻具的试验研究
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

P634.4

基金项目:

国家“十五”863项目“深水深孔天然气水合物保真取心钻具研制”(编号:2001AA611020/04)


Test Research on In-situ Sampler for Gas Hydrate
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    由于天然气水合物生存环境及特性特殊,所以了解其物化特性最有效的方法是通过钻探取样。天然气水合物钻探取样的关键是要有满足要求的钻探设备、钻探工具、钻探工艺及特殊的冲洗液。介绍了天然气水合物取样钻具的结构、原理、特点、钻进工艺及试验结果。根据海洋钻井的特点,提出了中国实施天然气水合物钻探经济实用的施工方案。

    Abstract:

    Since the existence environment and the characteristic of the gas hydrate are special, the most effective way to really get to know the physics and chemical natures of gas hydrate is to depend on the drilling sampling. Drilling equipment, drilling tool, drilling technologies and special drilling fluid are the most important factors to meet the requirement of the drilling and sampling engineering. The structures and principles, features, drilling technology and trial result of the sampling drilling tools for gas hydrate are introduced in the paper. And also, according to the characteristic of ocean drilling, the practical and economical drilling program for gas hydrates drilling in China is presented.

    参考文献
    相似文献
    引证文献
引用本文

张永勤 孙建华 赵海涛 刘秀美 王汉宝.天然气水合物保真取样钻具的试验研究[J].钻探工程,2007,34(9):62-65.
ZHANG Yong-qin, SUN Jian-hua, ZHAO Hai-tao, et al. Test Research on In-situ Sampler for Gas Hydrate[J]. Drilling Engineering, 2007,34(9):62-65.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:2007-08-01
  • 录用日期:
  • 在线发布日期:
  • 出版日期: