PDC钻头在天津地热井中的应用
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Application of PDC Bit in Geothermal Well in Tianjin
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    天津地热钻井,一般采用传统的三牙轮钻头进行施工,近年来随着钻井工艺水平的进步,为了提高钻井效率,在部分井段中采用PDC钻头钻进,相比三牙轮钻头取得了更高的机械钻速,且泥岩地层造浆得到很好的控制,钻井液性能稳定,降低了维护成本。实践证明,PDC钻头使用寿命长,在提高钻进效率的同时经济效益显著。

    Abstract:

    Geothermal well in Tianjin used to be constructed by traditional three-cone bit. With the development of drilling technology in recent years, PDC bit was adopted in some well sections to improve the drilling efficiency and mud making in mudstone formation was well controlled with steady performance of drilling fluid and lowered maintenance cost. PDC bit has long service life, which can improve drilling efficiency with obvious economical benefit.

    参考文献
    相似文献
    引证文献
引用本文

马忠平,杜槟,李振杰,等. PDC钻头在天津地热井中的应用[J].钻探工程,2010,37(7):12-14.
MA Zhong-ping, DU Bin, LI Zhen-jie, et al. Application of PDC Bit in Geothermal Well in Tianjin[J]. Drilling Engineering, 2010,37(7):12-14.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2009-11-25
  • 最后修改日期:2010-01-27
  • 录用日期:2010-04-01
  • 在线发布日期: 2010-07-22
  • 出版日期: 2010-07-25