优快钻井配套技术在希50-54井应用实践
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TE242

基金项目:


Application Practice of Optimized and Fast Drilling Comprehensive Techniques in Xi 50-54 Well
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    针对海塔地质特点和钻井难点,开展钻井技术研究和现场试验,制定了切实可行的钻井提速方案,较好地解决了上部地层易塌、中部地层易斜、下部地层硬造成的相关钻井技术难点,实现了优快钻井的目标,为增储上产提供了强有力的保障。以希50-54井为例,从技术应用思路和应用效果两方面出发,深入分析井身结构优化、钻头及参数优选、复合钻井等几大海塔优快钻井配套技术在现场实际中的应用情况,实践表明机械钻速得到大幅度提高,钻井周期明显缩短,效果显著。

    Abstract:

    According to geological characteristics and drilling difficulties in Haita district, drilling technical study and field test were made for drilling speed-rising plan. Technical difficulties caused by collapsing of upper-part formation, easy deviation in mid-part formation and hard bottom part formation were solved with the optimized and fast drilling realized. The paper analyzed the field application in borehole structural optimization, optical selection on drilling bit and parameters and compound drilling with the case of Xi 50-54 well, and it showed the great improvement on penetration rate and drilling period.

    参考文献
    相似文献
    引证文献
引用本文

李文明,陈绍云,刘永贵.优快钻井配套技术在希50-54井应用实践[J].钻探工程,2010,37(6):04-06,12.
LI Wen-ming, CHEN Shao-yun, LIU Yong-gui. Application Practice of Optimized and Fast Drilling Comprehensive Techniques in Xi 50-54 Well[J]. Drilling Engineering, 2010,37(6):04-06,12.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2009-12-29
  • 最后修改日期:2009-12-29
  • 录用日期:2010-01-21
  • 在线发布日期: 2010-07-07
  • 出版日期: 2010-06-25