梧桐庄矿大直径排水孔工程钻探施工技术
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Drilling Construction Technology of Large Diameter Drainage Hole in Wutongzhuang Mine
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    介绍了梧桐庄矿区孔深646 m、终孔直径526 mm两口排水孔的钻探施工技术。该2口排水孔深度大,孔径大,垂直度要求高,地层软硬互层变化较大,易缩径,穿层钻进时易形成孔斜,施工难度大,通过采用先用小径钻进、后扩孔的施工方法,并采取合理的钻具组合和泥浆,制定有效的防斜技术措施等,顺利完成排水孔施工,施工质量满足设计要求。

    Abstract:

    The paper introduced the drilling construction technology of drainage holes in Wutongzhuang mine. The 2 holes were of great depth and large diameter in soft-hard alternant stratum, construction was difficult with diameter shrinking and slant borehole. Small-diameter drilling and post-reaming were adopted with reasonable drilling tool assembly, drilling mud and effective deviation preventing measures, and the drainage hole construction was successfully completed.

    参考文献
    相似文献
    引证文献
引用本文

和新,尹丽,吴云莺.梧桐庄矿大直径排水孔工程钻探施工技术[J].钻探工程,2009,36(5):33-35.
HE Xin, YIN Li, WU Yun-ying. Drilling Construction Technology of Large Diameter Drainage Hole in Wutongzhuang Mine[J]. Drilling Engineering, 2009,36(5):33-35.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2008-12-02
  • 最后修改日期:2009-04-20
  • 录用日期:
  • 在线发布日期:
  • 出版日期: 2009-05-25