鄂西地区坚硬“打滑”地层钻进方法
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

P634.5

基金项目:


Drilling Method for Hard and Slipping Formation in Western Hubei
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    在鄂西地区磷矿、铅锌矿、银钒矿赋矿地层及上覆地层中,普遍存在着坚硬岩层。震旦系白云岩中含大量的硅质层和经化学沉积形成的“玉髓”层,硅质含量超过80%,并且结构致密,呈弱研磨性,岩石可钻性达到Ⅸ~Ⅹ级。通过钻探现场生产试验,从金刚石钻头选型、人工修磨钻头方法、金刚石钻进工艺参数选择等几个方面总结了生产实践中取得的成功经验,为今后进一步解决钻进打滑问题提出了思路。

    Abstract:

    In host strata of phosphate rock, lead-zinc mine, silver and vanadium ore and overlying strata of western Hubei, there is common existence of hard rocks. Sinian dolomite contains a large amount of silicon horizon and “chalcedony” layer formed by chemical vapor deposition, silicon content is more than 80% with dense structure, low abrasiveness and drillability of Ⅸ~Ⅹ level. By the test in drilling field, the paper described the diamond bit selection, artificial bit conditioning and diamond drilling process parameters selection; summed up the successful experience in construction practice for further resolving drilling slipping difficulty.

    参考文献
    相似文献
    引证文献
引用本文

谭建国,张所邦,刘健,等.鄂西地区坚硬“打滑”地层钻进方法[J].钻探工程,2011,38(4):22-24.
TAN Jian-guo, ZHANG Suo-bang, LIU Jian, et al. Drilling Method for Hard and Slipping Formation in Western Hubei[J]. Drilling Engineering, 2011,38(4):22-24.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2010-10-26
  • 最后修改日期:2011-02-24
  • 录用日期:2011-03-13
  • 在线发布日期: 2011-04-22
  • 出版日期: 2011-04-25