宽叶螺旋钻中风压钻进技术在晋城某矿的应用
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

P634

基金项目:


Application of Wide Blade Auger Drill with Medium Air Pressure in Jincheng Coalmine
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    针对晋城某矿井下沿煤层瓦斯抽采钻孔在施工过程中遇到煤层含水量较大时,孔内返风不畅,排粉效果差,影响钻孔孔深和成孔率等问题,采用宽叶片螺旋钻杆中风压钻进工艺及试验。现场试验证明该工艺在含水量较大的煤层沿煤层瓦斯抽采(放)孔钻进施工中较为理想,值得推广。

    Abstract:

    Great water content in coal seam was encountered in the construction of gas extraction drilling in Jincheng, aiming to the problems of bad in-hole ventilation, poor powder exhaust effect and the affection to borehole depth and hole completing rate, wide blade auger drilling technology with medium air pressure was adopted. The field test proves that this technology application is ideal in such construction conditions.

    参考文献
    相似文献
    引证文献
引用本文

郭涌.宽叶螺旋钻中风压钻进技术在晋城某矿的应用[J].钻探工程,2012,39(3):43-46.
GUO Yong. Application of Wide Blade Auger Drill with Medium Air Pressure in Jincheng Coalmine[J]. Drilling Engineering, 2012,39(3):43-46.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2011-09-15
  • 最后修改日期:2011-09-15
  • 录用日期:2011-11-29
  • 在线发布日期: 2012-03-19
  • 出版日期: