对深孔大口径取心钻探工艺的一些认识——以WFSD-2号孔0~897.66 m段施工为例
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

P634.5

基金项目:

科技部科技支撑计划专项“汶川地震断裂带科学钻探(WFSD)”项目之“科学钻探与科学测井”课题资助


Some Knowledge of Coring Drilling Technology in Large Diameter Deep Hole
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    深孔大口径取心钻探,钻孔口径大、地层复杂、钻孔结构复杂、深孔段效率低,钻进工艺尚不成熟,钻探工程难度较大。结合WFSD-2号孔0~897.66 m段施工情况,介绍了施工中存在的主要问题及采取的主要技术措施;对各种施工工艺、技术方法进行了对比分析,提出了建议。

    Abstract:

    Drilling is difficult for coring in large diameter deep hole because of large diameter, complex formation and borehole structure with immature drilling technology. According to the construction of the section of 0~897.66m of hole WFSD-2, the paper introduced the main problems and technical measures in construction. Comparative analysis was made on different construction technologies and technical methods, and some suggestions were put forward to the similar project.

    参考文献
    相似文献
    引证文献
引用本文

秦沛.对深孔大口径取心钻探工艺的一些认识——以WFSD-2号孔0~897.66 m段施工为例[J].钻探工程,2011,38(11):7-13.
QIN Pei. Some Knowledge of Coring Drilling Technology in Large Diameter Deep Hole[J]. Drilling Engineering, 2011,38(11):7-13.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2011-10-31
  • 最后修改日期:2011-11-09
  • 录用日期:2011-11-13
  • 在线发布日期: 2011-11-29
  • 出版日期: