塔河油田TK665CH井卡拉沙依组锻铣侧钻水平井技术
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TE243

基金项目:


Horizontal Well Sidetracking by Milling in Kalashayi Formation of Tahe Oilfield
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    近年来,在塔河油田老区直井基础上进行φ177.8 mm套管开窗(φ149.2 mm井眼)侧钻是主要开发方向之一。石炭系卡拉沙依组锻铣开窗存在循环压耗大,铁屑上返排量窗口窄,铁屑容易在锻铣套管上窗口堆积,易发生铁屑憋泵、缠刀、退刀困难,侧钻时地层压实性好,机械钻速低,井壁掉块卡钻,穿越两套压力体系井漏,摩阻扭矩大等复杂情况。在TK665CH井石炭系卡拉沙依组φ177.8 mm套管锻铣开窗侧钻施工中,通过钻头、钻进参数、导向马达、钻具组合的优选,轨迹的监控以及针对性的泥浆技术,侧钻获得成功,为塔河油田老井改造及定向侧钻积累了成功的经验。

    Abstract:

    Sidetracking in φ177.8mm case is one of the main development directions for vertical wells in old Tahe oilfield in recent years. Sidetracking in carboniferous kalashayi formation, iron scraps accumulate in the case opening because of large circulating pressure loss and narrow window for upward iron scraps, which bring high pump pressure, tangle cutter and difficult cutter backstroking; formation compactibility makes low penetration rate and blocking; penetrating 2 different pressure systems of carboniferous and ordovician causes lost circulation, large torque and drag. By the optimization of bit, drilling parameter, steerable motor and drilling tool assembly and by the trajectory monitoring and mud technique, sidetracking was successfully completed for old well reconstruction in Tahe oilfield.

    参考文献
    相似文献
    引证文献
引用本文

李益平.塔河油田TK665CH井卡拉沙依组锻铣侧钻水平井技术[J].钻探工程,2012,39(4):31-34,38.
LI Yi-ping. Horizontal Well Sidetracking by Milling in Kalashayi Formation of Tahe Oilfield[J]. Drilling Engineering, 2012,39(4):31-34,38.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2011-11-11
  • 最后修改日期:2011-12-05
  • 录用日期:2012-02-24
  • 在线发布日期: 2012-04-24
  • 出版日期: 2012-04-25