深孔钻进金刚石钻头的研制
DOI:
作者:
作者单位:

河北省地矿局探矿技术研究院,河北省地矿局探矿技术研究院,河北省地矿局探矿技术研究院,河北省地矿局探矿技术研究院,河北省地矿局探矿技术研究院,河北省地矿局探矿技术研究院

作者简介:

通讯作者:

中图分类号:

P634.4 1

基金项目:


Development of Diamond Bit for Deep Hole Drilling
Author:
Affiliation:

The Institute of Exploration Technology, Hebei Provincial Bureau of Ge-exploration and Mineral Development,The Institute of Exploration Technology, Hebei Provincial Bureau of Ge-exploration and Mineral Development,The Institute of Exploration Technology, Hebei Provincial Bureau of Ge-exploration and Mineral Development,The Institute of Exploration Technology, Hebei Provincial Bureau of Ge-exploration and Mineral Development,The Institute of Exploration Technology, Hebei Provincial Bureau of Ge-exploration and Mineral Development,The Institute of Exploration Technology, Hebei Provincial Bureau of Ge-exploration and Mineral Development

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    根据深孔钻进对金刚石钻头性能提出的新要求,从结构改进、金刚石选择与匹配、原材料优选、配方创新、制造工艺优化及针对地层优化性能参数等几个方面入手,研制了新型高胎体低温烧结钻头,通过野外现场试验验证,取得了较好的效果。

    Abstract:

    According to the new requirements to the performance of diamond bit for deep hole drilling, starting from the improvement of structure, selection and matching of diamond, optimization of raw materials, formula innovation, optimization of manufacturing process and optimal performance parameters in view of stratum, a new bit with high matrix by low-temperature sintering was developed. Good effects are achieved in the field test.

    参考文献
    相似文献
    引证文献
引用本文

孙秀梅,王建兴,刘建福,等.深孔钻进金刚石钻头的研制[J].钻探工程,2013,40(8):79-84.
SUN Xiu-mei, WANG Jian-xing, LIU Jian-fu, et al. Development of Diamond Bit for Deep Hole Drilling[J]. Drilling Engineering, 2013,40(8):79-84.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2013-04-16
  • 最后修改日期:2013-08-29
  • 录用日期:2013-06-03
  • 在线发布日期: 2013-09-05
  • 出版日期: