钻井漏失层位测量及堵漏模拟研究
DOI:
作者:
作者单位:

中石化胜利石油工程有限公司钻井工艺研究院

作者简介:

通讯作者:

中图分类号:

P634.6

基金项目:

中石化石油工程服务有限公司应用开发项目“复杂地层漏失测量仪器研制与实时判识技术”,(编号:SG1303-03K)


Stimulation of Drilling Leakage Zone Measurement and Plugging
Author:
Affiliation:

Drilling Technology Research Institute of Shengli Petroleum Administration Bureau

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    在钻井过程中经常发生严重的钻井液漏失,不仅给井下安全带来了巨大的隐患,同时也导致更加复杂的井下事故的发生,严重制约了油田的勘探与开发进度。如何有效地解决漏失问题是一个长期困扰工程界的难题。重点介绍了漏层判定方法和堵漏配方模拟评价方法。对于地层漏失,可以首先通过判定方法确定漏层位置,然后再对堵漏配方进行评价,最终形成理想的堵漏配方和相应的堵漏方案。该方法对于提高堵漏成功率,解决复杂地层重复漏失等技术难题具有一定的指导意义。

    Abstract:

    Lost circulation often happens during drilling process, which is not only a severe trouble for safe drilling, but also leads to more complex problems to seriously restrict the exploration and development of oil field. The decision method of leakage zone and the stimulation evaluation on plugging agent formula are introduced in the paper. For formation leakage, the lost circulation zone should be located first, and then the evaluation is made on the plugging agent formulas to decide an ideal formula and the corresponding plugging plan. The success rate of plugging can be increased by this way.

    参考文献
    相似文献
    引证文献
引用本文

刘振东.钻井漏失层位测量及堵漏模拟研究[J].钻探工程,2015,42(8):13-16.
LIU Zhen-dong. Stimulation of Drilling Leakage Zone Measurement and Plugging[J]. Drilling Engineering, 2015,42(8):13-16.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2014-10-22
  • 最后修改日期:2015-05-08
  • 录用日期:2015-06-16
  • 在线发布日期: 2015-09-07
  • 出版日期: