4/6/2025, 11:05:54 AM 星期日
油页岩原位裂解用注热管柱数值传热模拟与试验研究
CSTR:
作者:
作者单位:

吉林大学建设工程学院,吉林大学建设工程学院,贵州省交通规划勘察设计研究院股份有限公司,吉林大学建设工程学院,吉林大学建设工程学院

中图分类号:

P618.12

基金项目:

吉林省发改委项目“吉林省扶余千吨级油页岩示范工程项目”;吉林省省校共建计划专项“油页岩地下原位开发利用示范工程”(SF2017-5-1);吉林大学高层次科技创新团队建设项目(2017TD-13);中央高校基本科研业务费专项资金。


Numerical Simulation and Field Test study on Heat Injection Pipeline of Oil Shale In-Situ Pyrolysis
Author:
Affiliation:

College of Construction Engineering, Jilin University,College of Construction Engineering, Jilin University,Guizhou Trafic Planning and Design Academe Co., Ltd.,College of Construction Engineering, Jilin University,College of Construction Engineering, Jilin University

  • 摘要
  • | |
  • 访问统计
  • |
  • 参考文献 [16]
  • |
  • 相似文献 [20]
  • | | |
  • 文章评论
    摘要:

    油页岩作为一种非常规油气资源,有望成为石油的替代品。油页岩原位裂解技术对环境污染小,生成的油页岩油油品好,具有良好的开发前景。在原位裂解过程中,减少注热过程中的热量损失具有十分重要的意义,因此本文将对保温注热管柱的传热特性进行数值模拟和试验研究。通过传热学计算分析,保温注热管柱设计为外径?32mm的钢管,外层缠绕共计24mm的纳米保温材料。数值分析表明氮气流量越大,注热管柱出口温度达到稳定的时间越短,稳定温度也越高;当管柱氮气入口温度为500℃时,管柱出口温度在一定注气时间后均可达到400℃以上。在农安油页岩原位裂解先导试验工程中对注热管柱进行野外试验,管柱达到注热保温效果,井底温度达到设计温度,最终成功获得油页岩油。

    Abstract:

    As an unconventional oil and gas resource, oil shale is expected to be a substitute for oil. At present, the underground oil shale insitu pyrolysis technology has better prospects due to its good product quality and environmentfriendly to surroundings. The pyrolysis temperature is the key factor of oil shale insitu pyrolysis, so it is of great importance to reduce the heat loss of the heat injection pipe. Therefore, the heat transfer characteristic of heat injection pipe column for insitu pyrolysis is studied by numerical simulation and field test. According to the heat transfer calculation, the heat preservation and injection pipe column is designed to be a steel pipe with outer diameter of 32mm, and the outer layer is wrapped with 24mm thick aerogel. The numerical analysis shows that the larger the N2 injection flow rate is, the shorter the time to reach the steady temperature at the heat pipe column injection outlet can be; when the N2 inlet temperature of the pipe column is 500°C, the outlet temperature can reach 400℃ a certain time after gas injection. Field experiments are carried out on heat injection pipe column in Nong’an oil shale insitu pyrolysis pilot test project, the heat preservation effect is obtained and the temperature at the well bottom reaches the designed value, shale oil is successfully mined.

    参考文献
    [1]李霞. 中国石油对外依存度研究[J]. 经济研究导刊, 2011(31):171-172.
    [2]张德义. 世界能源消费形势刍议[J]. 中外能源, 2012, 17(3):1-11.
    [3]钱家麟, 尹亮. 油页岩:石油的补充能源[M]. 中国石化出版社, 2011.
    [4]钱家麟, 王剑秋, 李术元. 世界油页岩资源利用和发展趋势[J]. 吉林大学学报:地球科学版, 2006, 36(6):877-0887.
    [5]郭永刚, 许修强, 王红岩,等. 非常规能源油页岩开发利用的研究进展[J]. 江苏化工, 2008, 36(2):6-9.
    [6]汪凯明, WangKaiming. 我国非常规油气资源勘探开发前景[J]. 国外测井技术, 2009, 17(4):24-27.
    [7]Pan Y, Zhang X, Liu S, et al. A Review on Technologies for Oil Shale Surface Retort[J]. Journal- Chemical Society of Pakistan, 2012, 34(6):1331-1338.
    [8]曹祖宾, 张宗平,韩冬云, 李丹东.油页岩干馏工艺与工程[M].中国石化出版社; 2011.
    [9]方朝合, 郑德温, 刘德勋,等. 油页岩原位开采技术发展方向及趋势[J]. 能源技术与管理, 2009(2):78-80.
    [10]孙志坚,孙玮,傅加林,等.国内绝热保温材料现状及发展趋势[J].能源工程,2001(4):26-28.
    [11]郭莉. 保温材料的概况及选择[J]. 四川电力技术, 2005, 28(1):52-55.
    [12]刘承婷.蒸汽管道保温材料与保温结构优化研究[D].东北石油大学, 2013.
    [13]杨欢欢,刘鸿飞.激光测厚仪在热轧生产线上热防护的设计[J].仪表技术与传感器,2016(12):61-64.
    [14]周新仁.圆筒输热管隔热临界半径rc确定[J].石河子农学院学报,1996(01):57-60.
    [15]王聪,陈晨,孙友宏,王维,洪建俊,高帅.农安油页岩水力压裂模拟及实验研究[J].探矿工程(岩土钻掘工程),2015,42(11):7-11.
    [16]陈强,郭威,李强,孙友宏,赵帅.油页岩原位开采井钻井工艺设计与施工[J].探矿工程(岩土钻掘工程),2017,44(07):9-14.
    引证文献
    网友评论
    网友评论
    分享到微博
    发 布
引用本文

白文翔,孙友宏,周科,等.油页岩原位裂解用注热管柱数值传热模拟与试验研究[J].钻探工程,2018,45(4):1-5.
BAI Wen-xiang, SUN You-hong, ZHOU Ke, et al. Numerical Simulation and Field Test study on Heat Injection Pipeline of Oil Shale In-Situ Pyrolysis[J]. Drilling Engineering, 2018,45(4):1-5.

复制
分享
文章指标
  • 点击次数:1215
  • 下载次数: 991
  • HTML阅读次数: 256
  • 引用次数: 0
历史
  • 收稿日期:2018-03-21
  • 最后修改日期:2018-03-21
  • 录用日期:2018-04-03
  • 在线发布日期: 2018-05-24
文章二维码