湘西金矿复杂地层大口径充填孔定向钻进技术
作者:
作者单位:

1.湖南省有色地质勘查局工程地质总队,湖南 长沙 410007; 2.湖南省有色地质勘查局一总队,湖南 郴州 423000

作者简介:

通讯作者:

中图分类号:

P634

基金项目:


Directional drilling technique for a large diameter filling hole in complicated formation in Xiangxi Gold Mine
Author:
Affiliation:

1.Engineering Geological Corps of Hunan Provincial Nonferrous Metals Geological Exploration Bureau, Changsha Hunan 410007, China; 2.Team 1 of Hunan Provincial Nonferrous Metals Geological Exploration Bureau, Chenzhou Hunan 423000, China

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    根据湘西金矿深厚陡倾角地层的特点,采用传统防斜方法(如满眼组合防斜技术、钟摆组合防斜技术)不能保证钻孔垂直度,首次使用随钻测斜仪配合螺杆定向钻进先施工引导孔,再用气动潜孔锤冲击回转钻进快速完成大口径充填孔扩孔,取得了较好的效果。采用螺杆能较好地实现定向钻进,钻孔轨迹偏斜位移能被控制在8.67 m范围内。

    Abstract:

    In view of the deep and high dip strata in Xiangxi Gold Mine, where the traditional deviation prevention methods, such as the packed hole drilling string, the pendulum drilling string, cannot guarantee the borehole verticality , the mud motor was used with MWD for the first time to drill a pilot hole, and then pneumatic DTH drilling to quickly ream it to the large diameter filling borehole, achieving good results. The mud motor can provide better directional drilling with the deviation controlled within 8.67m.

    参考文献
    相似文献
    引证文献
引用本文

伍新民,易振兴,吴俊贤,等.湘西金矿复杂地层大口径充填孔定向钻进技术[J].钻探工程,2020,47(6):26-29.
WU Xinmin, YI Zhenxing, WU Junxian, et al. Directional drilling technique for a large diameter filling hole in complicated formation in Xiangxi Gold Mine[J]. Drilling Engineering, 2020,47(6):26-29.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2020-03-24
  • 最后修改日期:2020-04-13
  • 录用日期:2020-05-19
  • 在线发布日期: 2020-07-03
  • 出版日期: