中低温水井清洁型凝胶压裂液设计与研究
作者:
作者单位:

中国地质调查局水文地质环境地质调查中心,河北 保定 071051

作者简介:

通讯作者:

中图分类号:

P634

基金项目:

国家重点研发计划项目“地下饮用水源快速探测与开采技术”(编号:2018YFC1508703)


Design and research of clean gel fracturing fluid for medium and low temperature wells
Author:
Affiliation:

Center for Hydrogeology and Environmental Geology, CGS, Baoding Hebei 071051, China

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    基岩水井压裂增水技术自研发以来取得较为良好的增产效果,但该技术目前仍存在适用性差、增产效果不确定等问题。基于压裂增水过程中流体流态和裂缝宽度影响因素分析的结果,确定了提高压裂液粘度是较为经济、有效的增产技术措施。开展了水井和中低温地热井清洁型凝胶压裂液配方的设计工作,进行了稠化剂、pH值调节剂、交联剂和破胶剂选配与性能实验,研发了适用于水井和中低温地热井(30~80 ℃)清洁型凝胶压裂液体系并开展现场试验。对凝胶压裂液配液应用难点与使用成本进行了分析,进一步补充完善了水井压裂增水技术在压裂液方向的研究。

    Abstract:

    Since bedrock water well fracturing technology was developed, it has achieved good stimulation effect, but there are still some problems such as poor adaptability and uncertainty in stimulation performance. Based on the analysis results of the factors influencing the fluid flow pattern and the fracture width in fracturing stimulation, it is determined that increasing the viscosity of fracturing fluid is a more economic and effective stimulation technical measure. The design of clean gel fracturing fluid formulations for water wells and middle and low temperature geothermal wells has been carried out; and the thickener, pH regulator, crosslinking agent and gel breaker have been selected and tested. A clean gel fracturing fluid system suitable for water wells and medium and low temperature geothermal wells (30 to 80℃) has been developed and field tested. Analysis is conducted of the application difficulties and cost of gel fracturing fluid, which supplements the research on fracturing technology for water well fracturing stimulation.

    参考文献
    相似文献
    引证文献
引用本文

冯建月,王营超,李小杰,等.中低温水井清洁型凝胶压裂液设计与研究[J].钻探工程,2022,49(4):104-110.
FENG Jianyue, WANG Yingchao, LI Xiaojie, et al. Design and research of clean gel fracturing fluid for medium and low temperature wells[J]. Drilling Engineering, 2022,49(4):104-110.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2021-06-29
  • 最后修改日期:2022-02-21
  • 录用日期:2022-02-25
  • 在线发布日期: 2022-07-18
  • 出版日期: 2022-07-10