自激振荡旋转冲击钻进工艺应用研究
CSTR:
作者:
作者单位:

1.贵州省地质矿产勘查开发局111地质大队,贵州 贵阳 550081;2.中国地质调查局长沙自然资源综合调查中心,湖南 长沙 410600;3.中国石油集团渤海钻探工程技术研究院,河北 任丘062550;4.贵州省地质矿产勘查开发局,贵州 贵阳 550004

作者简介:

通讯作者:

中图分类号:

P634.5;TE242

基金项目:

贵州省地矿局地质科研项目“贵州地热深井自激振荡旋冲钻井提速技术研究与应用”(编号:黔地矿科合[2021]28号);贵州省科技厅重大科技成果转化项目“地下河走向物理化学探测及数字地图绘制技术集成与应用”(编号:黔科合成果[2023]重大006);贵州省科技厅科技支撑计划“煤矿井下定向钻进轨迹动态控制技术”(编号:黔科合支撑[2022]一般245)


Research on the application of self-excited oscillation rotary impact drilling technique
Author:
Affiliation:

1.Geological Brigade 111, Bureau of Geology and Mineral Exploration and Development, Guizhou Province,Guiyang Guizhou 550081, China;2.Changsha General Survey of Natural Resources Center, China Geological Survey, ChangshaHunan410600, China;3.Engineering Technology Research Institute, CNPC Bohai Drilling Engineering Company Limited,Renqiu Hebei062550, China;4.Bureau of Geology and Mineral Exploration and Development, Guizhou Province, Guiyang Guizhou 550004, China

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    自激振荡旋转冲击钻进工艺可提高碎岩效率,提升机械钻速。在冀中地区北部试验井中进行了应用试验。试验井段钻孔直径215.9 mm,钻具组合为PDC钻头+ZJXC-178型自激振荡冲击工具,分试钻井段和后续井段两个井段进行了现场应用试验。通过对同井、邻井的扭矩、钻头使用情况、机械钻速及岩屑等分析对比,自激振荡旋转冲击钻进工艺显著提升了钻井速度,实现了高达73.4%的提速效果,并且单只钻头的进尺量也得到了48.2%的提升。验证了该工艺在提升钻井效率方面的有效性,在保证钻头破岩切削力的同时,有效减小了扭矩的突变,显著抑制了钻头粘滑振动现象,从而实现提速的同时保护钻头。

    Abstract:

    The self-excited vibration rotary percussion drilling technology can improve the rock breaking efficiency and the ROP.The application test in a test well located in the northern part of the Jizhong region were presented.The drilling diameter of the test well section is 215.9mm, and the BHA is PDC bit+ZJXC-178 self-excited vibration impact tool. The field application tests are carried out in two well sections, the test drilling section and the subsequent well section. Through a meticulous analysis and comparison of torque, bit usage, ROP and cuttings in the same well and adjacent well, the self-excited vibration rotary percussion drilling technology significantly improved the drilling speed, achieved the speed increase effect of up to 73.4%, and the footage of a single bit also increased by 48.2%.The effectiveness of this technology in improving drilling efficiency is verified. While ensuring the rock breaking cutting force of the bit, the sudden change of torque is effectively reduced, and the stick slip vibration of the bit is significantly inhibited, so as to achieve speed increase and protect the bit at the same time.

    参考文献
    相似文献
    引证文献
引用本文

惠航,王虎,陈新勇,等.自激振荡旋转冲击钻进工艺应用研究[J].钻探工程,2024,51(S1):166-171.
HUI Hang, WANG Hu, CHEN Xinyong, et al. Research on the application of self-excited oscillation rotary impact drilling technique[J]. Drilling Engineering, 2024,51(S1):166-171.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2024-07-18
  • 最后修改日期:2024-07-31
  • 录用日期:2024-08-01
  • 在线发布日期: 2024-11-08
  • 出版日期:
文章二维码