竖井中导井一次爆破成井法的研究与应用
作者:
作者单位:

浙江省隧道工程集团有限公司,浙江 杭州 310013

作者简介:

通讯作者:

中图分类号:

TD235

基金项目:


Research and application of the one shot blasting pilot hole sinking method for the shaft
Author:
Affiliation:

Zhejiang Tunnel Engineering Group Co., Ltd., Hangzhou Zhejiang 310013, China

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    本文以某水利工程闸门井竖井开挖为例,中导井开挖尺寸2 m×2 m,通过实践总结研究,介绍了竖井中导井施工开挖的一种新方法——中导井一次爆破成井法,着重介绍了中导井如何一次爆破贯通的技术措施。本工法采用中导井一次爆破成井和竖井周边扩挖相结合。开挖方法采用深孔爆破法,通过爆破方案设计、施工前准备、机械钻孔、装药、联线、爆破、炮后安全检查等工艺,先对中导井进行一次爆破开挖成型,再对竖井周边岩体自上而下采用浅孔多循环爆破扩挖成型,最终形成竖井中导井。

    Abstract:

    In relation to the gate shaft excavation at a water conservancy project where the excavation size is 2 m×2 m for the shaft pilot hole, this paper introduces a new excavation method-the one shot blasting method for sinking of the central pilot hole with emphasis on the technical measures on how to complete the central pilot hole by one-time blasting. With this method, one shot blasting for the central pilot hole is combined with expanding excavation around the hole. The deep hole blasting method is adopted for excavation. Through the design of the blasting scheme, preparation before construction, mechanical drilling, charging, wire connection, blasting, safety inspection after blasting and other processes, the central pilot hole is first excavated and shaped by one shot blasting, and then it is expanded and shaped by shallow hole multi-cycle blasting through the surrounding rock from top to bottom, and finally the central pilot hole is formed.

    参考文献
    相似文献
    引证文献
引用本文

昌禄柱.竖井中导井一次爆破成井法的研究与应用[J].钻探工程,2021,48(S1):407-411.
CHANG Luzhu. Research and application of the one shot blasting pilot hole sinking method for the shaft[J]. Drilling Engineering, 2021,48(S1):407-411.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2021-06-17
  • 最后修改日期:2021-06-17
  • 录用日期:2021-07-11
  • 在线发布日期: 2021-12-06
  • 出版日期: