Determination of Drilling Fluid Density Window Model for CBM Well by FEM
DOI:
Author:
Affiliation:

National Engineering Laboratory for Exploration and Development of Low Permeability Oil and Gas Field Drilling Fluid Department of Changqing Engineering and Technology Research Institute in Chuanqing Drilling and Exploration Corporation,Department of Petroleum Engineering, University of Petroleum,National Engineering Laboratory for Exploration and Development of Low Permeability Oil and Gas Field Drilling Fluid Department of Changqing Engineering and Technology Research Institute in Chuanqing Drilling and Exploration Corporation,National Engineering Laboratory for Exploration and Development of Low Permeability Oil and Gas Field Drilling Fluid Department of Changqing Engineering and Technology Research Institute in Chuanqing Drilling and Exploration Corporation,National Engineering Laboratory for Exploration and Development of Low Permeability Oil and Gas Field Drilling Fluid Department of Changqing Engineering and Technology Research Institute in Chuanqing Drilling and Exploration Corporation,National Engineering Laboratory for Exploration and Development of Low Permeability Oil and Gas Field Drilling Fluid Department of Changqing Engineering and Technology Research Institute in Chuanqing Drilling and Exploration Corporation,National Engineering Laboratory for Exploration and Development of Low Permeability Oil and Gas Field Drilling Fluid Department of Changqing Engineering and Technology Research Institute in Chuanqing Drilling and Exploration Corporation,National Engineering Laboratory for Exploration and Development of Low Permeability Oil and Gas Field Drilling Fluid Department of Changqing Engineering and Technology Research Institute in Chuanqing Drilling and Exploration Corporation,Department of Petroleum Engineering, University of Petroleum

Clc Number:

TE371

Fund Project:

  • Article
  • |
  • Figures
  • |
  • Metrics
  • |
  • Reference
  • |
  • Related
  • |
  • Cited by
  • |
  • Materials
  • |
  • Comments
    Abstract:

    With the rapid growth of market demand for natural gas, how to successfully develop the rich CBM reservoir in Ningwu basin becomes an important subject in unconventional gas reservoir development. It is one of the key factors to scientifically determine a suitable drilling fluid density window by combining with the crustal stress state, the parameters of formation pore pressure and formation strength, as well as angle of deviation and azimuth angle in order to realize effective and safe coal-bed methane industrialization development in Ningwu basin. The finite element model of No. 9 coal seam in Ningwu basin is established by ANSYS software, the influence rule of hole enlargement ratio is analyzed in the conditions of different crustal stress directions and different well inclination, by which the optimized range of mud density is obtained to control coal seam collapse and reduce complex prescription, and the support for research on improvement of drilling efficiency and comprehensive benefit of CBM in NingWu basin is found.

    Reference
    Related
    Cited by
Get Citation
Share
Article Metrics
  • Abstract:
  • PDF:
  • HTML:
  • Cited by:
History
  • Received:December 12,2013
  • Revised:December 12,2013
  • Adopted:April 08,2014
  • Online: May 28,2014
  • Published: