4/6/2025, 2:21:33 PM 星期日
Design and Application of a Pipe Section Repair Device for High Water Pressure Pipe Jacking Tunnel
CSTR:
Affiliation:

CPP NO.4,CPP NO.4,CPP NO.4,CPP

Clc Number:

TE973.9

  • Article
  • | |
  • Metrics
  • |
  • Reference [9]
  • |
  • Related [2]
  • | | |
  • Comments
    Abstract:

    Taking Fuchun River pipe jacking engineering as an example, this paper introduces a quick-detachable device for local damage on pipe section in deep buried pipe jacking tunnel, which has simple and compact structure and is easy to be assembled in the tunnel with circular cross-section. With the maximum tolerance of water pressure of 0.8MPa, this device can repair damaged pipe section less than 0.4m along the axis at 30~80m below the groundwater level by grouting in pipe jacking tunnel to effectively deal with small area local damage and small scale water leakage & sand gushing, and it can provide emergency repair supports for circular cross-section tunnel constructed with pipe jacking method.

    Reference
    [1] 马保松. 非开挖工程学[M]. 人民交通出版社, 2008, 第4.1.8节.
    [2] 丁传松. 直线及曲线顶管施工中的顶推力研究[D]. 南京工业大学, 2004.
    [3] 吉成. 地下顶管施工的若干问题研究[D]. 南京理工大学, 2014.
    [4] 何莲. 顶管施工中管节损坏事故分析及处理[J]. 市政技术, 2004.
    [5] 李万才. 大口径长距离顶管工程注浆减摩技术[M]. 管道技术与设备,2000.
    [6] 陈春茂. 非开挖管道修复技术[J]. 市政技术, 2004, 22(4): 208-213.
    [7] 杨雄. 非开挖顶管工艺在供水管道修复中的应用研究. 山西建筑, 2009, 35(1): 204-205.
    [8] 熊旺. 大口径玻璃钢夹砂管进行顶管施工的实践[J]. 中国给排水, 2003.
    [9] 刘海龙,张震. 浅析非开挖顶管技术特点及监控要点[J]. 土木建筑学术文库,第7卷, 2007.
    Cited by
    Comments
    Comments
    分享到微博
    Submit
Get Citation
Share
Article Metrics
  • Abstract:1141
  • PDF: 1037
  • HTML: 198
  • Cited by: 0
History
  • Received:November 06,2015
  • Revised:May 14,2016
  • Adopted:May 16,2016
  • Online: June 16,2016
Article QR Code