4/6/2025, 2:21:32 PM 星期日
Home > Archive>Volume 48, Issue 3, 2021 >10-20. DOI:10.12143/j.ztgc.2021.03.002
PDF HTML XML Export Cite reminder
Research on tribological properties of polycrystalline cubic boron nitride tools based on drilling tools cutting
CSTR:
[cstr]
Author:
Affiliation:

1.School of Engineering and Technology, China University of Geosciences, Beijing 100083, China;2.School of Science, China University of Geosciences, Beijing 100083, China;3.Zhengzhou Research Institute, China University of Geosciences, Zhengzhou Henan 451283, China;4.Zhengzhou Institute of Multipurpose Utilization of Mineral Resources, CAGS, Zhengzhou Henan 450006, China;5.Sinounited Investment Group Corporation Limited, Beijing 100081, China

Clc Number:

P634;TH117

  • Article
    • | |
  • Metrics
    • |
  • Reference [34]
    • |
  • Related
    • |
  • Cited by
    • | |
  • Comments
    Abstract:

    In order to solve the problem of accidents in the hole encountered in the drilling project， cutters are used for accident drills. However， rocks could be cut when drills are cut. Therefore， the friction and wear tests of polycrystalline cubic boron nitride （PCBN） against the Si3N4 ball are designed at different annealing temperatures based on the complex working conditions. Optical microscope， X-ray diffractometer （XRD）， scanning electron microscope （SEM）， X-ray energy spectrometer （EDS） were used to analyze the influence of heat treatment on PCBN and the tribological behavior of PCBN against the Si3N4 ball. The results show that： After annealing treatment above 800℃， PCBN binder oxidation generates TiO2. Furthermore， there is slight adhesive wear after PCBN at annealing treatment of 800℃ against Si3N4 ball. Adhesive wear is more serious after PCBN at annealing treatment of 900℃ against Si3N4 ball. However， abrasive wear and adhesive wear coexist after PCBN at annealing treatment of 1000℃ against Si3N4 ball. In addition， friction coefficients of PCBN against Si3N4 ball are associated with the annealing temperatures.

    Reference
    [1] 国土资源部.国土资源“十三五”科技创新发展规划[Z].2016.Ministry of Land and Resources. Land and resources “13th Five-Year” scientific and technological innovation development plan[Z]. 2016.
    [2] 自然资源部.自然资源科技创新发展规划纲要[Z].2018.Ministry of Land and Resources. Outline of the natural resources science and technology innovation development plan[Z]. 2018.
    [3] 张金昌.地质钻探技术与装备21世纪新进展[J].探矿工程（岩土钻掘工程），2016，43 （4）：10-17.ZHANG Jinchang. New development of the 21st century geological drilling technology and equipment[J]. Exploration Engineering （Rock & Soil Drilling and Tunneling）， 2016，43（4）：10-17.
    [4] 孙建华，刘秀美，王志刚，等.地质钻探孔内复杂情况和孔内事故种类梳理分析[J].探矿工程（岩土钻掘工程），2017，44（1）： 4-9.SUN Jianhua， LIU Xiumei， WANG Zhigang， et al. Classification and analysis on complex cases and accidents in geological drilling holes[J]. Exploration Engineering （Rock & Soil Drilling and Tunneling）， 2017，44（1）：4-9.
    [5] 李粤南.深部孔段卡、埋钻事故防治对策的探讨[J].探矿工程（岩土钻掘工程），2011，38（9）： 2-5.LI Yuenan. Discussion of prevention measures for bit freezing and burying accidents in deep borehole[J]. Exploration Engineering （Rock & Soil Drilling and Tunneling）， 2011，38（9）：2-5.
    [6] 胡郁乐，张绍和.钻探事故预防与处理知识问答[M].长沙：中南大学出版社，2010．HU Yule， ZHANG Shaohe. Questions and answers on drilling accident prevention and treatment knowledge[M]. Changsha： Central South University Press， 2010.
    [7] 蒋希文.钻井事故与复杂问题（第二版）[M].北京：石油工业出版社，2006．JIANG Xiwen. Drilling accidents and complex problems （Second Edition）[M]. Beijing： Petroleum Industry Press， 2006.
    [8] 陈永杰，王海阔，彭进，等.聚晶立方氮化硼的制备方法及应用进展[J].金刚石与磨料磨具工程，2015，35（2）：74-80.CHEN Yongjie， WANG Haikuo， PENG Jin， et al. Production method stand application of polycrystalline cubic boron nitride[J]. Diamond & Abrasives Engineering， 2015，35（2）：74-80.
    [9] 王光祖.立方氮化硼磨具新近探究综述[J].超硬材料工程，2016，28（4）：42-46.WANG Guangzu. Review of recent research on cubic boron nitride grinding tools[J]. Superhard material Engineering， 2016，28（4）：42-46.
    [10] Zhao Z， Xu B， Tian Y. Recent advances in superhard materials[J]. Annual Review of Materials Research， 2016，46：383-406.
    [11] 于启勋.超硬刀具材料的发展与应用[J].工具技术，2004，38（11）：9-12.YU Qixun. Developmeng and application of ultrahard cutting tool material[J]. Tool Engineering， 2004，38（11）：9-12.
    [12] Dewes R C， Aspinwall D K. A review of ultra high speed milling of hardened steels[J]. Journal of Materials Processing Technology， 1997，69：1-17.
    [13] Chou Y K， Evans C J. Cubic boron nitride tool wear in interrupted hard cutting[J]. Wear， 1999，225-229：234-245.
    [14] Abrao A M， Aspinwall D K. Temperature evaluation of cutting tools during machining of hardened bearing steel using polycrystalline cubic boron nitride and ceramic cutting tools[J]. Materials Science and Technology， 1997，13（5）：445-450.
    [15] Shalaby M A， Hakim M A， Veldhuis S C. A thermal model for hard precision turning[J]. The International Journal of Advanced Manufacturing Technology， 2018，98：2401-2413.
    [16] Ren X J， Yang Q X， James R D， et al. Cutting temperatures in hard turning chromium hardfacings with PCBN tooling[J]. Journal of Materials Processing Technology， 2004，147（1）： 38-44.
    [17] Harris T K， Brookes E J， Taylor C J. The effect of temperature on the hardness of polycrystalline cubic boron nitride cutting tool materials[J]. International Journal of Refractory Metals and Hard Materials， 2004，22（2-3）：105-110.
    [18] Chen L， Tai B L， Chaudhari R G， et al. Machined surface temperature in hard turning[J]. International Journal of Machine Tools & Manufacture， 2017，121：10-21.
    [19] 于英华.机械制造技术基础[M].北京：机械工业出版社，2013.YU Yinghua. Fundaments of mechanical manufacturing technology[M]. Beijing： Mechanical Industry Press， 2013.
    [20] Cerce L， Pusavec F. Increasing machinability of grey cast iron using cubic boron nitride tools： Evaluation of wear mechanisms[J]. Indian Journal of Engineering and Materials Sciences， 2016，23： 65-78.
    [21] Braghini A， Coelho R T. An investigation of the wear mechanisms of polycrystalline cubic boron nitride （PCBN） tools when end milling hardened steels at low/medium cutting speeds[J]. International Journal of Advanced Manufacturing Technology， 2001，17（4）：244-251.
    [22] Liu X L， Wen D H， Li Z J， et al. Experimental study on hard turning hardened GCr15 steel with PCBN tool[J]. Journal of Materials Processing Technology， 2002，129（1）：217-221.
    [23] Yang H， Ding N， Niu X， et al. Wear mechanism of PCBN hard cutting the powder metallurgy valve seats[J]. Key Engineering Materials， 2016，693：996-1002.
    [24] 王成彪，刘家浚，韦淡平，等.摩擦学材料及表面工程[M].北京：国防工业出版社，2012.WANG Chengbiao， LIU Jiajun， WEI Danping， et al. Tribological materials and surface engineering [M]. Beijing： National Defense Industry Press， 2012.
    [25] Watanabe S， Miyake S， Murakawa M. Tribological properties of cubic， amorphous and hexagonal boron nitride films[J]. Surface and Coatings Technology， 1991，49：406-410.
    [26] Watanabe S， Miyake S， Murakawa M. Tribological behavior of cubic boron nitride film sliding against diamond[J]. Journal of Tribology， 1995，117：629-632.
    [27] Watanabe S， Miyake S， Jin M， et al. Frictional behaviors of cubic BN film sliding against DLC[J]. Tribology International， 2004，37：923-927.
    [28] Chong Y M， Ye Q， Yang Y， et al. Tribological study of cubic boron nitride films[J]. Diamond and Related Materials， 2010，19：654-660.
    [29] Liu E L， An W Z， Zhang C， et al. Experimental research on oxidation behavior when cutting Ti-5553 with cemented carbide and PCBN tools[J]. Ferroelectrics， 2020，563：128-138.
    [30] Qin W B， Yue W， Wang C B. Understanding integrated effects of humidity and interfacial transfer film formation on tribological behaviors of sintered polycrystalline diamond[J]. RSC Advances， 2015，5：53484-53496.
    [31] Sanchez-Lopez J C， Erdemir A， Donnet C， et al. Feiction-in-duced structural transformations of diamond-like carbon coatings under various atmospheres[J]. Surface Coating Technology， 2003，163：444-450.
    [32] Schall J D， Gao G， Harrison J A. Effects of adhesion and transfer film formation on the tribology of self-mated DLC contacts[J]. Journal of Physical Chemistry C. 2009，114：5321-5330.
    [33] Bushlya V， Gutnichenko O， Zhou J， et al. Effects of cutting speed when turning age hardened inconel 718 with PCBN tools of binderless and Low-CBN grades[J]. Machining Science and Technology， 2013，17：497-523.
    [34] Tsutomu I， Hiroshi S. Phase formation and characterization of hard coatings in the Ti-Al-N system prepared by the cathodic arc ion plating method[J]. Thin Solid Films， 1991，195：99-110.
    Related
    Cited by
Get Citation

Copy
Share
Article Metrics
  • Abstract:
  • PDF:
  • HTML:
  • Cited by:
History
  • Received:October 29,2020
  • Revised:January 28,2021
  • Adopted:February 01,2021
  • Online: March 22,2021
  • Published: March 10,2021
Article QR Code
Today's visits：1814 Total visits：155921   津ICP备19010518号-1  

津公网安备12011002024030号
Address：No.77 Jinguang District, Langfang City, Hebei Province Post Code：065000 Phone：0316-2096324
URL：http://www.tkgc.net/ E-mail：tkgc@mail.cgs.gov.cn
Drilling Engineering ® 2025 All Rights ReservedSupported by:Beijing E-Tiller Technology Development Co., Ltd.