4/6/2025, 12:50:14 AM 星期日
Influence of preheated gas on the autothermic pyrolysis in-situ conversion process (ATS) for oil shale exploitation
Author:
  • FAN Cunhan 1,2,3,4

    FAN Cunhan

    College of Construction Engineering, Jilin University, ChangchunJilin130026, China;National-Local Joint Engineering Laboratory of In-situ Conversion, Drilling and Exploitation Technology for Oil Shale, Jilin University, ChangchunJilin130026, China;Provincial and Ministerial Co-construction of Collaborative Innovation Center for Shale Oil Gas Exploration and Development, ChangchunJilin130026, China;Key Lab of Ministry of Natural Resources for Drilling and Exploitation Technology in Complex Conditions, Jilin University, ChangchunJilin130026, China
    Find this author on All Journals
    Find this author on BaiDu
    Search for this author on this site
  • ZHU Chaofan 1,2,3,4

    ZHU Chaofan

    College of Construction Engineering, Jilin University, ChangchunJilin130026, China;National-Local Joint Engineering Laboratory of In-situ Conversion, Drilling and Exploitation Technology for Oil Shale, Jilin University, ChangchunJilin130026, China;Provincial and Ministerial Co-construction of Collaborative Innovation Center for Shale Oil Gas Exploration and Development, ChangchunJilin130026, China;Key Lab of Ministry of Natural Resources for Drilling and Exploitation Technology in Complex Conditions, Jilin University, ChangchunJilin130026, China
    Find this author on All Journals
    Find this author on BaiDu
    Search for this author on this site
  • LIU Zhao 1,2,3,4

    LIU Zhao

    College of Construction Engineering, Jilin University, ChangchunJilin130026, China;National-Local Joint Engineering Laboratory of In-situ Conversion, Drilling and Exploitation Technology for Oil Shale, Jilin University, ChangchunJilin130026, China;Provincial and Ministerial Co-construction of Collaborative Innovation Center for Shale Oil Gas Exploration and Development, ChangchunJilin130026, China;Key Lab of Ministry of Natural Resources for Drilling and Exploitation Technology in Complex Conditions, Jilin University, ChangchunJilin130026, China
    Find this author on All Journals
    Find this author on BaiDu
    Search for this author on this site
  • SHUI Haoche 1,2,3,4

    SHUI Haoche

    College of Construction Engineering, Jilin University, ChangchunJilin130026, China;National-Local Joint Engineering Laboratory of In-situ Conversion, Drilling and Exploitation Technology for Oil Shale, Jilin University, ChangchunJilin130026, China;Provincial and Ministerial Co-construction of Collaborative Innovation Center for Shale Oil Gas Exploration and Development, ChangchunJilin130026, China;Key Lab of Ministry of Natural Resources for Drilling and Exploitation Technology in Complex Conditions, Jilin University, ChangchunJilin130026, China
    Find this author on All Journals
    Find this author on BaiDu
    Search for this author on this site
  • DONG Guangshun 1,2,3,4

    DONG Guangshun

    College of Construction Engineering, Jilin University, ChangchunJilin130026, China;National-Local Joint Engineering Laboratory of In-situ Conversion, Drilling and Exploitation Technology for Oil Shale, Jilin University, ChangchunJilin130026, China;Provincial and Ministerial Co-construction of Collaborative Innovation Center for Shale Oil Gas Exploration and Development, ChangchunJilin130026, China;Key Lab of Ministry of Natural Resources for Drilling and Exploitation Technology in Complex Conditions, Jilin University, ChangchunJilin130026, China
    Find this author on All Journals
    Find this author on BaiDu
    Search for this author on this site
  • LI Yanwei 1,2,3,4

    LI Yanwei

    College of Construction Engineering, Jilin University, ChangchunJilin130026, China;National-Local Joint Engineering Laboratory of In-situ Conversion, Drilling and Exploitation Technology for Oil Shale, Jilin University, ChangchunJilin130026, China;Provincial and Ministerial Co-construction of Collaborative Innovation Center for Shale Oil Gas Exploration and Development, ChangchunJilin130026, China;Key Lab of Ministry of Natural Resources for Drilling and Exploitation Technology in Complex Conditions, Jilin University, ChangchunJilin130026, China
    Find this author on All Journals
    Find this author on BaiDu
    Search for this author on this site
  • GUO Wei 1,2,3,4

    GUO Wei

    College of Construction Engineering, Jilin University, ChangchunJilin130026, China;National-Local Joint Engineering Laboratory of In-situ Conversion, Drilling and Exploitation Technology for Oil Shale, Jilin University, ChangchunJilin130026, China;Provincial and Ministerial Co-construction of Collaborative Innovation Center for Shale Oil Gas Exploration and Development, ChangchunJilin130026, China;Key Lab of Ministry of Natural Resources for Drilling and Exploitation Technology in Complex Conditions, Jilin University, ChangchunJilin130026, China
    Find this author on All Journals
    Find this author on BaiDu
    Search for this author on this site
Affiliation:

1.College of Construction Engineering, Jilin University, ChangchunJilin130026, China;2.National-Local Joint Engineering Laboratory of In-situ Conversion, Drilling and Exploitation Technology for Oil Shale, Jilin University, ChangchunJilin130026, China;3.Provincial and Ministerial Co-construction of Collaborative Innovation Center for Shale Oil Gas Exploration and Development, ChangchunJilin130026, China;4.Key Lab of Ministry of Natural Resources for Drilling and Exploitation Technology in Complex Conditions, Jilin University, ChangchunJilin130026, China

Clc Number:

P634;TE35

  • Article
  • | |
  • Metrics
  • |
  • Reference [21]
  • |
  • Related
  • |
  • Cited by
  • | |
  • Comments
    Abstract:

    Underground in-situ conversion is an inevitable trend of industrialized development of oil shale, and the autothermic pyrolysis in-situ conversion process (ATS) is a compound and efficient heating method to realize underground in-situ conversion of oil shale. In order to investigate the influence of different high-temperature carrier gases in the preheating stage on the effect of autogenous thermal in-situ conversion of oil shale, this paper took the oil shale in Fuyu area of Jilin, China, as an example, and injected four high-temperature gases, namely, nitrogen, air, steam, and carbon dioxide, into the preheating stage to conduct numerical simulation analysis, and compared the differences in the final oil and gas yields and the energy recovery rates. Taking the high-temperature nitrogen injection group as the control group in the preheating stage, the results showed that the time needed to complete the extraction by injecting high-temperature air, steam and carbon dioxide was reduced by 22%, 39% and 12%, respectively, and the maximum energy recovery rate was increased by 55%, 86% and 23%, respectively, and the total oil production was reduced by 5%, increased by 18% and reduced by 11%. From the perspectives of mining completion time, energy recovery rate and total oil production, steam injection preheating had the best effect. Therefore, a comprehensive comparison showed that the autogenous thermal extraction method of steam injection preheating could effectively increase the oil production, reduce the time required for extraction, and improve the energy utilization rate.

    Reference
    [1] 刘招君,杨虎林,董清水,等.中国油页岩[M].北京:石油工业出版社,2009.LIU Zhaojun, YANG Hulin, DONG Qingshui, et al. Oil Shale in China[M]. Beijing: Petroleum Industry Press, 2009.
    [2] 孙友宏,郭威,邓孙华.油页岩地下原位转化与钻采技术现状及发展趋势[J].钻探工程,2021,48(1):57-67.SUN Youhong, GUO Wei, DENG Sunhua. Current status and development trend of underground in-situ transformation and drilling technology of oil shale[J]. Drilling Engineering, 2021,48(1):57-67.
    [3] Guo H F, Peng S Y, Lin J D, et al. Retorting oil shale by a self-heating route[J]. Energy Fuels: an American Chemical Society Journal, 2013,27(5):2445-2451.
    [4] Zhu J Y, Yi L P, Yang Z Z, et al. Three-dimensional numerical simulation on the thermal response of oil shale subjected to microwave heating[J]. Chemical Engineering Journal, 2021,407:127197.
    [5] Guo W, Shui H, Liu Z, et al. Reliability analysis of elastic graphite packer in heat injection well during oil shale in-situ conversion[J]. Advances in Geo-Energy Research, 2023,7(1):28-38.
    [6] Wang D, Liu Y Y, Zhang T, et al. Structural and quantitative evolution of organic matters in oil shale during two different retorting processes[J]. AIChE Journal, 2021,67(8):e17278.
    [7] Guo H F, Pei Y S, Wang K K, et al. Identifying the reaction mechanism of oil-shale self-heating retorting by thermal analysis techniques[J]. Fuel, 2015,160:255-264.
    [8] 杨秦川.自生热法原位裂解油页岩的理论与室内实验研究[D].长春:吉林大学,2022.YANG Qinchuan. Theoretical and indoor experimental studies on in situ fracturing of oil shale by autogenous heat[D]. Changchun: Jilin University, 2022.
    [9] Xu S T, Sun Y H, Guo W, et al. Regulating the oxidative assisted pyrolysis of Huadian oil shale by preheating temperature and oxygen flow rate[J]. Energy, 2023,262, Part B:125602.
    [10] 宋青磊,刘招君,胡菲,等.松辽盆地扶余—长春岭地区上白垩统青山口组油页岩品质特征及意义[J].世界地质,2016,35(2):487-494.SONG Qinglei, LIU Zhaojun, HU Fei, et al. Oil shale characteristics of upper cretaceous Qiangshankou Formation in Fuyu-Changchunling area of Songliao Basin and its significance[J]. Global Geology, 2016,35(2):487-494.
    [11] Braun R L, Burnham A K. PMOD: A flexible model of oil and gas generation, cracking, and expulsion[J]. Organic Geochemistry, 1992,19(1/3):161-172.
    [12] Zhu C F, Guo W, Sun Y H, et al. Reaction mechanism and reservoir simulation study of the high-temperature nitrogen injection in-situ oil shale process: A case study in Songliao Basin, China[J]. Fuel, 2022,316:123164.
    [13] 贺文同.油页岩原位转化条件下热解产物演化规律与反应进程研究[D].长春:吉林大学,2021.HE Wentong. Study on the evolution law and reaction process of pyrolysis products under the conditions of oil shale in-situ conversion[D]. Changchun: Jilin University, 2021.
    [14] 张海龙.东北北部区油页岩资源评价及评价方法研究[D].长春:吉林大学,2008.ZHANG Hailong. Research on oil shale resource evaluation and evaluation methods in Northern of Northeast China[D]. Changchun: Jilin University, 2008.
    [15] Guo W, Li Q, Deng S H, et al. Mechanism and reservoir simulation study of the autothermic pyrolysis in-situ conversion process for oil shale recovery[J]. Petroleum Science, 2022,20(2):1053-1067.
    [16] 董光顺,朱超凡,厉家宗,等.黄陵矿区富油煤对流加热原位转化开发效果数值模拟[J].煤田地质与勘探,2023,51(4):57-67.DONG Guangshun, ZHU Chaofan, LI Jiazong, et al. Numerical simulation on development effect of tar-rich coal through in-situ conversion by convective heating in Huangling Mining Area[J]. Coal Geology Exploration, 2023,51(4):57-67.
    [17] 王磊,赵阳升,杨栋.注水蒸汽原位热解油页岩细观特征研究[J].岩石力学与工程学报,2020,39(8):1634-1647.WANG Lei, ZHAO Yangsheng, YANG Dong. Investigation on meso-characteristics of in-situ pyrolysis of oil shale by injecting steam[J]. Chinese Journal of Rock Mechanics and Engineering, 2020,39(8):1634-1647.
    [18] 刘召.油页岩原位开采气驱止水特征实验和数值模拟及应用研究[D].长春:吉林大学,2021.LIU Zhao. Experimental and numerical simulation and application research on gas-driven water-stopping characteristics of oil shale in-situ mining[D]. Changchun: Jilin University, 2021.
    [19] 孙友宏,徐绍涛,杨秦川,等.桦甸油页岩有氧热解反应及其产物分布[J].中国石油大学学报(自然科学版),2021,45(2):149-156.SUN Youhong, XU Shaotao, YANG Qinchuan, et al. Oxidizing pyrolysis of Huadian oil shale and its product distribution[J]. Journal of China University of Petroleum (Edition of Natural Science), 2021,45(2):149-156.
    [20] 高慧梅,何应付,周锡生.注二氧化碳提高原油采收率技术研究进展[J].特种油气藏,2009,16(1):6-12.GAO Huimei, HE Yingfu, ZHOU Xisheng. Research progress on CO2 EOR technology[J]. Special Oil Gas Reservoirs, 2009,16(1):6-12.
    [21] Brandt A R. Converting oil shale to liquid fuels: Energy inputs and greenhouse gas emissions of the shell in situ conversion process[J]. Environmental Science Technology, 2008,42(19):7489-7495.
    Related
    Cited by
Get Citation
Share
Article Metrics
  • Abstract:
  • PDF:
  • HTML:
  • Cited by:
History
  • Received:March 29,2024
  • Revised:September 10,2024
  • Adopted:October 29,2024
  • Online: December 04,2024
  • Published: November 10,2024
Article QR Code