4/6/2025, 2:32:12 PM 星期日
Home > Archive>Volume 51, Issue 5, 2024 >67-76. DOI:10.12143/j.ztgc.2024.05.008
PDF HTML XML Export Cite reminder
Experimental study on the sealing characteristics of fractured formation by shear thickening fluid
CSTR:
[cstr]
Author:
Affiliation:

1.Key Laboratory of Metallogenic Prediction of Nonferrous Metals and Geological Environment Monitoring (Central South University), Ministry of Education, Changsha Hunan 410083, China;2.Key Laboratory of Non-Ferrous Resources and Geological Hazard Detection, Changsha Hunan 410083, China;3.School of Geosciences and Info-Physics, Central South University, Changsha Hunan 410083, China;4.PowerChina Zhongnan Engineering Corporation Limited, Changsha Hunan 410014, China;5.No.230 Research Institute of Nuclear Industry, Changsha Hunan 410034, China

Clc Number:

P634.8

  • Article
    • | |
  • Metrics
    • |
  • Reference [31]
    • |
  • Related [20]
    • | | |
  • Comments
    Abstract:

    The fracture leakage channel in fractured formation usually has multi-scale characteristics and uncertainty. The drilling fluid leakage problem is particularly prominent in the construction of geological drilling in fractured formation. Shear Thickening Fluid （STF）， as a new type of intelligent material， has excellent properties such as self-sensing， self-adaptation and self-repair， and has been widely used in many fields. In this study， shear thickening fluid was used as a plugging material， and the plugging characteristics of shear thickening fluid were investigated under different dispersed phase concentrations （56.9vol%， 59.2vol% and 61.7vol%）， slit widths （1，2，3，4，5mm） and pressure conditions through the plugging test of API plugging instrument. The plugging test results show that the amount of leakage increases with the increase of seam width and time. When the concentration of nano silica increases in the range of 56.9%~61.7%， the leakage rate will be reduced and the effect of the gap width on the leakage rate will be weakened. When the leakage pressure is 0 MPa， the shear thickening fluid does not produce thickening effect， but leaks out from the seam in the form of liquid. When the pressure increases slightly， the thickening effect will be stimulated， and agglomeration particles will be generated to seal the seam pipe and reduce the leakage rate. When the pressure further increases beyond the bearing capacity of the sealing layer， the shear-thickening fluid is extruded out of the fracture in a plate form. The application of shear-thickening fluid in plugging field is expected to provide innovative solutions for plugging in fractured formation.

    Reference
    [1] 王胜，欧兴贵，解程超，等.钻井利器的故事之“护壁堵漏材料”[J].钻探工程，2024，51（3）：157-161.WANG Sheng， Xinggui OU， XIE Chengchao， et al. The story of a drilling weapon： Wall protection and plugging materials[J]. Drilling Engineering， 2024，51（3）：157-161.
    [2] 黄宁，孙金声，刘敬平，等.水基钻井液封堵理论和材料研究现状及发展趋势[J].化工进展，2024（3）：1-18.HUANG Ning， SUN Jinsheng， LIU Jingping， et al. Research status and development trend of plugging theory and materials of water-based drilling fluid[J]. Chemical Industry and Engineering Progress， 2024（3）：1-18.
    [3] 杨科，罗龙，曹灶开，等.阳山矿区严重漏失垮塌地层钻进工艺及工程实践[J].钻探工程，2024，51（2）：119-126.YANG Ke， LUO Long， CAO Zaokai， et al. Drilling technology and engineering practice for seriously lost and collapsed formation in Yangshan Mining Area[J]. Drilling Engineering， 2024，51（2）：119-126.
    [4] 孙金声，白英睿，程荣超，等.裂缝性恶性井漏地层堵漏技术研究进展与展望[J].石油勘探与开发，2021，48（3）：630-638.SUN Jinsheng， BAI Yingrui，CHENG Rongchao， et al. Research progress and prospect of plugging technologies for fractured formation with severe lost circulation[J]. Petroleum Exploration and Development，2021，48（3）：630-638.
    [5] ALKINANI H H， AL-HAMEEDI A T T， DUNN-NORMAN S， et al. Using data mining to stop or mitigate lost circulation[J]. Journal of Petroleum Science and Engineering， 2019，173：1097-1108.
    [6] 张希文，李爽，张洁，等.钻井液堵漏材料及防漏堵漏技术研究进展[J].钻井液与完井液，2009，26（6）：74-76.ZHANG Xiwen， LI Shuang， ZHANG Jie， et al. Research progress of plugging materials and anti-leakage plugging technology for drilling fluid[J]. Drilling Fluid & Completion Fluid， 2009，26（6）：74-76.
    [7] 孙平贺，刘伟胜，杨涵涵，等.中国非开挖水平定向钻进装备与技术研究应用进展[J].工程科学学报，2022，44（1）：122-130.SUN Pinghe， LIU Weisheng， YANG Hanhan， et al. Progress in research and applications of trenchless horizontal directional drilling equipment and technology in China[J]. Chinese Journal of Engineering， 2022，44（1）：122-130.
    [8] 杨沛，陈勉，金衍，等.裂缝承压能力模型及其在裂缝地层堵漏中的应用[J].岩石力学与工程学报，2012，31（3）：479-487.YANG Pei， CHEN Mian， JIN Yan， et al. Crack pressure bearing capacity model and its application to plugging of fractured formation[J]. Chinese Journal of Rock Mechanics and Engineering， 2012，31（3）：479-487.
    [9] 孙威威.海坨区块高效堵漏体系的优化与应用[J].钻探工程，2021，48（12）：72-78.SUN Weiwei. Optimization and application of the efficient plugging system in the Haituo block[J]. Drilling Engineering， 2021，48（12）：72-78.
    [10] 蔡利山，苏长明，刘金华.易漏失地层承压能力分析[J].石油学报，2010，31（2）：311-317.CAI Lishan， SU Changming， LIU Jinhua. Analysis on pressure-bearing capacity of leakage formation[J]. Acta Petrolei Sinica， 2010，31（2）：311-317.
    [11] 刘金华.顺北油气田二叠系火成岩漏失分析及堵漏技术[J].钻探工程，2023，50（2）：64-70.LIU Jinhua. Leakage analysis and plugging technology for Permian igneous rock in Shunbei Oil and Gas Field[J]. Drilling Engineering， 2023，50（2）：64-70.
    [12] 闫晶，张坤，郭栋，等.弹性体型胶粘材料在大庆油田裂缝性漏失中的应用研究[J].钻探工程，2024，51（2）：133-139.YAN Jing， ZHANG Kun， GUO Dong， et al. Application of elastic adhesive material in drilling fluid plugging of fractured formation in Daqing Oilfield[J]. Drilling Engineering， 2024，51（2）：133-139.
    [13] 张晶.煤矿区钻井裂缝性漏失承压堵漏机理与关键技术研究[D].北京：煤炭科学研究总院，2020.ZHANG Jing. Study on the mechanism and key technology of fracture leakage plugging while drilling in coal mining area[D]. Beijing： China Coal Research Institute， 2020.
    [14] 熊正强，陶士先，周风山，等.聚合物交联凝胶堵漏性能评价方法研究进展[J].西安石油大学学报（自然科学版），2023，38（1）：85-94.XIONG Zhengqiang， TAO Shixian， ZHOU Fengshan， et al. Progress in plugging performance evaluation methods of polymer crosslinked gel[J]. Journal of Xi’an Shiyou University （Natural Science Edition）， 2023，38（1）：85-94.
    [15] Chenevert M E， Dewan J T. A model for filtration of water-base mud during drilling： Determination of mudcake parameters[J]. Petrophysics—The SPWLA Journal of Formation Evaluation and Reservoir Description， 2001，42（3）.
    [16] 任冠龙，吕开河，刘玉霞，等.钻井液滤饼物性参数测量研究进展[J].钻井液与完井液，2014，31（1）：84-90.REN Guanlong， Kaihe LÜ， LIU Yuxia， et al. Research progress on measurement of physical properties of drilling fluid cake[J]. Drilling Fluid & Completion Fluid， 2014，31（1）：84-90.
    [17] ALI A， KALLOO C L， SINGH U B. Preventing lost circulation in severely depleted unconsolidated sandstone reservoirs[J]. SPE Drilling & Completion， 1994，9（1）：32-38.
    [18] YANG Y， YUAN B， WANG Y. Updated methodology for evaluating lost circulation control of cement slurry for double lost channels[J]. Journal of Petroleum Science and Engineering， 2018，171：16-22.
    [19] BAHL S， NAGAR H， SINGH I， et al. Smart materials types， properties and applications： A review[J]. Materials Today： Proceedings， 2020，28：1302-1306.
    [20] 白英睿，孙金声，吕开河，等.剪切响应型凝胶堵漏剂及其制备方法与应用：CN201910185780.4[P].2020-02-18.BAI Yingrui， SUN Jinsheng， Kaihe LÜ， et al. Shear-responsive gel plugging agent and its preparation method and application： CN201910185780.4[P]. 2020-02-18.
    [21] 白英睿，张启涛，孙金声，等.杂化交联复合凝胶堵漏剂的制备及其性能评价[J].中国石油大学学报（自然科学版），2021，45（4）：176-184.BAI Yingrui， ZHANG Qitao， SUN Jinsheng， et al. Synthesis and performance evaluation of a hybrid cross-linked plugging agent[J]. Journal of China University of Petroleum （Edition of Natural Science）， 2021，45（4）：176-184.
    [22] ZHAO Z， SUN J， LIU F， et al. High-temperature-resistant thermal shape memory polymers as lost circulation materials for fracture formations[J]. SPE Journal， 2023，28（5）：2629-2641.
    [23] GÜRGEN S， KUŞHAN M C， LI W. Shear thickening fluids in protective applications： A review[J]. Progress in Polymer Science， 2017，75：48-72.
    [24] 赵明媚，张进秋，彭志召，等.剪切增稠液体理论基础和工程应用进展概述[J].材料导报，2022，36（9）：211-218.ZHAO Mingmei， ZHANG Jinqiu， PENG Zhizhao， et al. Theoretical basis and engineering application progress of shear thickening fluid[J]. Materials Reports， 2022，36（9）：211-218.
    [25] GÜRGEN S， SOFUOĞLU M A. Experimental investigation on vibration characteristics of shear thickening fluid filled CFRP tubes[J]. Composite Structures， 2019，226：111236.
    [26] GÜRGEN S， KUŞHAN M C. The ballistic performance of aramid based fabrics impregnated with multi-phase shear thickening fluids[J]. Polymer Testing， 2017，64：296-306.
    [27] van EGMOND J W. Shear-thickening in suspensions， associating polymers， worm-like micelles， and poor polymer solutions[J]. Current Opinion in Colloid & Interface Science， 1998，3（4）：385-390.
    [28] 杨人元，占晓，徐余欢，等.剪切增稠流体在Kevlar复合材料中的应用研究进展[J].胶体与聚合物，2024，42（1）：42-45.YANG Renyuan， ZHAN Xiao， XU Yuhuan， et al. Research progress on the application of shear thickening fluid in Kevlar composites[J]. Chinese Journal of Colloid & Polymer， 2024，42（1）：42-45.
    [29] HOFFMAN R L. Discontinuous and dilatant viscosity behavior in concentrated suspensions. II. Theory and experimental tests[J]. Journal of Colloid and Interface Science， 1974，46（3）： 491-506.
    [30] BARNES H A. Shear-thickening （“Dilatancy”） in suspensions of no aggregating solid particles dispersed in Newtonian liquids[J]. Journal of Rheology， 1989，33（2）：329-366.
    [31] CAO S， HE Q， PANG H， et al. Stress relaxation in the transition from shear thinning to shear jamming in shear thickening fluid[J]. Smart Materials and Structures， 2018，27（8）：85013.
    Cited by
    Comments
    Comments
    分享到微博
    Submit
Get Citation

Copy
Share
Article Metrics
  • Abstract:53
  • PDF: 2104
  • HTML: 23
  • Cited by: 0
History
  • Received:July 30,2024
  • Revised:July 30,2024
  • Adopted:August 07,2024
  • Online: October 08,2024
Article QR Code
Today's visits：1826 Total visits：155933   津ICP备19010518号-1  

津公网安备12011002024030号
Address：No.77 Jinguang District, Langfang City, Hebei Province Post Code：065000 Phone：0316-2096324
URL：http://www.tkgc.net/ E-mail：tkgc@mail.cgs.gov.cn
Drilling Engineering ® 2025 All Rights ReservedSupported by:Beijing E-Tiller Technology Development Co., Ltd.